Error analysis and compensation of multipole resolvers

Liu Mingji; Yao Yu; Zou Jibin; Lu Yongping; Ngoo Livingstone; Gao Wenxue

doi:10.1088/0957-0233/10/12/324

Error analysis and compensation of multipole resolvers

Liu Mingji^*
, Yao Yu
, Zou Jibin
, Lu Yongping
, Ngoo Livingstone
, Gao Wenxue

^*Corresponding author for this work

School of Electrical Engineering and Automation

Harbin Institute of Technology

Research output: Contribution to journal › Article › peer-review

24 Scopus citations

Abstract

The signal errors of the multipole resolver and the measurement error incurred due to the signal errors are analysed, and expressions for the errors are determined. Based on the results of the analysis, a compensation method utilizing an analogue circuit for the measurement error is presented. The zero-position error and the amplitude error of the 34-pole resolver are compensated using the compensation circuit presented. The measurement accuracy of the 34-pole resolver is improved significantly from about 15 to 2 min. The correctness of the analysis result and the effectiveness of the compensation method are also verified.

Original language	English
Pages (from-to)	1292-1295
Number of pages	4
Journal	Measurement Science and Technology
Volume	10
Issue number	12
DOIs	https://doi.org/10.1088/0957-0233/10/12/324
State	Published - Dec 1999

Keywords

Angular position of shaft
Control system
Multipole resolver

Access to Document

10.1088/0957-0233/10/12/324

Cite this

@article{3a2caf7d6d914933ac9dd5df5b9d0e40,

title = "Error analysis and compensation of multipole resolvers",

abstract = "The signal errors of the multipole resolver and the measurement error incurred due to the signal errors are analysed, and expressions for the errors are determined. Based on the results of the analysis, a compensation method utilizing an analogue circuit for the measurement error is presented. The zero-position error and the amplitude error of the 34-pole resolver are compensated using the compensation circuit presented. The measurement accuracy of the 34-pole resolver is improved significantly from about 15 to 2 min. The correctness of the analysis result and the effectiveness of the compensation method are also verified.",

keywords = "Angular position of shaft, Control system, Multipole resolver",

author = "Liu Mingji and Yao Yu and Zou Jibin and Lu Yongping and Ngoo Livingstone and Gao Wenxue",

year = "1999",

month = dec,

doi = "10.1088/0957-0233/10/12/324",

language = "英语",

volume = "10",

pages = "1292--1295",

journal = "Measurement Science and Technology",

issn = "0957-0233",

publisher = "Institute of Physics",

number = "12",

}

TY - JOUR

T1 - Error analysis and compensation of multipole resolvers

AU - Mingji, Liu

AU - Yu, Yao

AU - Jibin, Zou

AU - Yongping, Lu

AU - Livingstone, Ngoo

AU - Wenxue, Gao

PY - 1999/12

Y1 - 1999/12

N2 - The signal errors of the multipole resolver and the measurement error incurred due to the signal errors are analysed, and expressions for the errors are determined. Based on the results of the analysis, a compensation method utilizing an analogue circuit for the measurement error is presented. The zero-position error and the amplitude error of the 34-pole resolver are compensated using the compensation circuit presented. The measurement accuracy of the 34-pole resolver is improved significantly from about 15 to 2 min. The correctness of the analysis result and the effectiveness of the compensation method are also verified.

AB - The signal errors of the multipole resolver and the measurement error incurred due to the signal errors are analysed, and expressions for the errors are determined. Based on the results of the analysis, a compensation method utilizing an analogue circuit for the measurement error is presented. The zero-position error and the amplitude error of the 34-pole resolver are compensated using the compensation circuit presented. The measurement accuracy of the 34-pole resolver is improved significantly from about 15 to 2 min. The correctness of the analysis result and the effectiveness of the compensation method are also verified.

KW - Angular position of shaft

KW - Control system

KW - Multipole resolver

UR - https://www.scopus.com/pages/publications/0033293627

U2 - 10.1088/0957-0233/10/12/324

DO - 10.1088/0957-0233/10/12/324

M3 - 文章

AN - SCOPUS:0033293627

SN - 0957-0233

VL - 10

SP - 1292

EP - 1295

JO - Measurement Science and Technology

JF - Measurement Science and Technology

IS - 12

ER -

Error analysis and compensation of multipole resolvers

Abstract

Keywords

Access to Document

Other files and links

Fingerprint

Cite this