Enhanced Wear Performance of Hybrid Epoxy-Ceramic Coatings on Magnesium Substrates

Junjie Yang; Shichun Di; Carsten Blawert; Sviatlana V. Lamaka; Linqian Wang; Banglong Fu; Pingli Jiang; Li Wang; Mikhail L. Zheludkevich

doi:10.1021/acsami.8b10612

Enhanced Wear Performance of Hybrid Epoxy-Ceramic Coatings on Magnesium Substrates

Junjie Yang^*
, Shichun Di
, Carsten Blawert
, Sviatlana V. Lamaka
, Linqian Wang
, Banglong Fu
, Pingli Jiang
, Li Wang
, Mikhail L. Zheludkevich

^*Corresponding author for this work

School of Mechatronics Engineering, Harbin Institute of Technology
Helmholtz-Zentrum Hereon
Kiel University

Research output: Contribution to journal › Article › peer-review

36 Scopus citations

Abstract

Epoxy-based polymer was deposited as sealing agent on porous anodized coatings prepared by plasma electrolytic oxidation (PEO) to construct multilayered "soft-hard" coatings on Mg substrates. Different thicknesses and microstructures of the top epoxy layer were achieved by employing different dip-coating strategies. Atomic force microscopy, pull-off tests, and nanoindentation tests were conducted to study the surface roughness, the adhesion strength of the epoxy layer, and the mechanical properties of each component in the hybrid coating system. The micropores and other defects on the anodized layers were sealed by the epoxy polymer, which decreased the surface roughness. The dominant abrasive wear behavior of blank PEO coatings was significantly reduced by the epoxy layers, and the wear mechanism of the hybrid coatings was proposed considering both the microstructure of the hybrid coatings and the mechanical properties of the different components in the hybrid system.

Original language	English
Pages (from-to)	30741-30751
Number of pages	11
Journal	ACS Applied Materials and Interfaces
Volume	10
Issue number	36
DOIs	https://doi.org/10.1021/acsami.8b10612
State	Published - 12 Sep 2018
Externally published	Yes

Keywords

PEO
epoxy polymer
hybrid coating
magnesium
wear properties

Access to Document

10.1021/acsami.8b10612

Cite this

@article{e8e800408e0148fc9ef992eb59aa4caa,

title = "Enhanced Wear Performance of Hybrid Epoxy-Ceramic Coatings on Magnesium Substrates",

abstract = "Epoxy-based polymer was deposited as sealing agent on porous anodized coatings prepared by plasma electrolytic oxidation (PEO) to construct multilayered {"}soft-hard{"} coatings on Mg substrates. Different thicknesses and microstructures of the top epoxy layer were achieved by employing different dip-coating strategies. Atomic force microscopy, pull-off tests, and nanoindentation tests were conducted to study the surface roughness, the adhesion strength of the epoxy layer, and the mechanical properties of each component in the hybrid coating system. The micropores and other defects on the anodized layers were sealed by the epoxy polymer, which decreased the surface roughness. The dominant abrasive wear behavior of blank PEO coatings was significantly reduced by the epoxy layers, and the wear mechanism of the hybrid coatings was proposed considering both the microstructure of the hybrid coatings and the mechanical properties of the different components in the hybrid system.",

keywords = "PEO, epoxy polymer, hybrid coating, magnesium, wear properties",

author = "Junjie Yang and Shichun Di and Carsten Blawert and Lamaka, \{Sviatlana V.\} and Linqian Wang and Banglong Fu and Pingli Jiang and Li Wang and Zheludkevich, \{Mikhail L.\}",

note = "Publisher Copyright: {\textcopyright} 2018 American Chemical Society.",

year = "2018",

month = sep,

day = "12",

doi = "10.1021/acsami.8b10612",

language = "英语",

volume = "10",

pages = "30741--30751",

journal = "ACS Applied Materials and Interfaces",

issn = "1944-8244",

publisher = "American Chemical Society",

number = "36",

}

TY - JOUR

T1 - Enhanced Wear Performance of Hybrid Epoxy-Ceramic Coatings on Magnesium Substrates

AU - Yang, Junjie

AU - Di, Shichun

AU - Blawert, Carsten

AU - Lamaka, Sviatlana V.

AU - Wang, Linqian

AU - Fu, Banglong

AU - Jiang, Pingli

AU - Wang, Li

AU - Zheludkevich, Mikhail L.

PY - 2018/9/12

Y1 - 2018/9/12

N2 - Epoxy-based polymer was deposited as sealing agent on porous anodized coatings prepared by plasma electrolytic oxidation (PEO) to construct multilayered "soft-hard" coatings on Mg substrates. Different thicknesses and microstructures of the top epoxy layer were achieved by employing different dip-coating strategies. Atomic force microscopy, pull-off tests, and nanoindentation tests were conducted to study the surface roughness, the adhesion strength of the epoxy layer, and the mechanical properties of each component in the hybrid coating system. The micropores and other defects on the anodized layers were sealed by the epoxy polymer, which decreased the surface roughness. The dominant abrasive wear behavior of blank PEO coatings was significantly reduced by the epoxy layers, and the wear mechanism of the hybrid coatings was proposed considering both the microstructure of the hybrid coatings and the mechanical properties of the different components in the hybrid system.

AB - Epoxy-based polymer was deposited as sealing agent on porous anodized coatings prepared by plasma electrolytic oxidation (PEO) to construct multilayered "soft-hard" coatings on Mg substrates. Different thicknesses and microstructures of the top epoxy layer were achieved by employing different dip-coating strategies. Atomic force microscopy, pull-off tests, and nanoindentation tests were conducted to study the surface roughness, the adhesion strength of the epoxy layer, and the mechanical properties of each component in the hybrid coating system. The micropores and other defects on the anodized layers were sealed by the epoxy polymer, which decreased the surface roughness. The dominant abrasive wear behavior of blank PEO coatings was significantly reduced by the epoxy layers, and the wear mechanism of the hybrid coatings was proposed considering both the microstructure of the hybrid coatings and the mechanical properties of the different components in the hybrid system.

KW - PEO

KW - epoxy polymer

KW - hybrid coating

KW - magnesium

KW - wear properties

UR - https://www.scopus.com/pages/publications/85052286938

U2 - 10.1021/acsami.8b10612

DO - 10.1021/acsami.8b10612

M3 - 文章

C2 - 30114361

AN - SCOPUS:85052286938

SN - 1944-8244

VL - 10

SP - 30741

EP - 30751

JO - ACS Applied Materials and Interfaces

JF - ACS Applied Materials and Interfaces

IS - 36

ER -

Enhanced Wear Performance of Hybrid Epoxy-Ceramic Coatings on Magnesium Substrates

Abstract

Keywords

Access to Document

Other files and links

Fingerprint

Cite this