Effects of the fuel-lean coal/air flow damper opening on combustion, energy conversion and emissions in a supercritical down-fired boiler

In-situ trials were carried out to investigate the effects of the fuel-lean coal/air flow damper opening (FLD) on the pulverized-coal combustion and energy conversion efficiency in a 350-MW supercritical down-fired boiler. This boiler was operated with inferior coal, having a high ash content and low calorific value. The influence of combustion in furnace on steam temperature and coal consumption of a supercritical down-fired boiler were discussed innovatively. The experimental results indicate that, as the FLD was decreased from 100% to 25%, heating of the fuel-rich coal/air flow accelerated such that the overall furnace temperature increased and the thermal load gradually focused at the furnace center area. As a result, the maximum temperature of the water-wall in the lower furnace was reduced and the superheating degree rose significantly. Thus the superheated and reheated steam temperatures increased from 550.4 and 545.8 °C to 558.2 and 555.0 °C. Reducing the FLD also lowered the carbon in the fly ash and slag from 8.17% and 7.70% to 4.51% and 3.43%, respectively. Furthermore, the increase of boiler efficiency and the decrease of specific heat consumption both contributed to the reduction of the specific coal consumption, from 354.45 to 340.43 g·(kW·h)⁻¹, thus the energy conversion efficiency of the unit was improved. However, adjustment of the FLD had only a minimal effect on NO_x emissions, which remained in the range of 654–672 mg/m³ at 6% O₂. Based on optimizing coal combustion characteristic and economic performance of the unit, an optimal FLD of 25% was recommended.