Skip to main navigation Skip to search Skip to main content

Effects of sputtering pressure on properties of al doped ZnO thin films dynamically deposited by rf magnetron sputtering

  • H. B. Zhou
  • , H. Y. Zhang
  • , M. L. Tan
  • , W. J. Zhang
  • , W. L. Zhang
  • Harbin Institute of Technology (Shenzhen)
  • Tsinghua University

Research output: Contribution to journalArticlepeer-review

Abstract

Aluminium doped zinc oxide (AZO) films were dynamically deposited by rf magnetron sputtering under various sputtering pressures in the range of 0.3-2.0 Pa. The effect of the Ar sputtering pressure on the structural, electrical and optical properties of the AZO films was systematically investigated by X-ray diffractometry, scanning electron microscope, four-point probe measurement and UV-vis spectrophotometer. As the sputtering pressures decrease, the crystallite sizes of the films became larger, while their deposition rate turns higher. Under the condition of lower sputtering pressures, a decrease in the resistivity was observed due to an increase in carrier concentration. The AZO film deposited at 0.5 Pa in the dynamic mode has shown the lowest resistivity of 9.5X10-4 Ω cm. This work was performed in a dynamic deposition system in order to produce a large area of AZO films, which is more important in practical fields to improve productivity.

Original languageEnglish
Pages (from-to)390-394
Number of pages5
JournalEnergy Materials: Materials Science and Engineering for Energy Systems
Volume7
Issue number4
StatePublished - 2012
Externally publishedYes

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

  1. SDG 7 - Affordable and Clean Energy
    SDG 7 Affordable and Clean Energy

Keywords

  • AZO thin films
  • Dynamic deposition
  • Photoconductivity
  • Photovoltaics
  • Pressure
  • RF magnetron sputtering

Fingerprint

Dive into the research topics of 'Effects of sputtering pressure on properties of al doped ZnO thin films dynamically deposited by rf magnetron sputtering'. Together they form a unique fingerprint.

Cite this