Effect of Ultrasonic Vibration on Deformation in Micro-blanking Process with Copper Foil

Effect of ultrasonic vibration on deformation in micro-blanking was investigated with copper foils of different grain sizes using a developed device. It is found that maximum shearing strength is decreased by ultrasonic vibration, and this effect becomes bigger for coarse grain than that for fine grain, which can be attributed to acoustic softening effect considering the absorbed acoustic energy. Surface roughness R_a of smooth zone decreases for the polishing effect of vibration at the lateral contact surface. When ultrasonic vibration is applied, the sheared deformation area becomes relatively narrow, and it leads to the reduction of radius of rollover. The analysis of cross section in sheared deformation area shows that the crack initiation is inhabited for the existence of acoustic softening, and the proportion of smooth zone is increased. Also, angle of crack propagation becomes smaller because of periodic strain, and the angle of facture surface is decreased. As a result, the quality of micro-sheet parts is improved by applying ultrasonic vibration.