Effect of SnO2 coating content on the microstructure of AL18B4o33w/6061AL composite extruded at 350 °C

P. T. Zhao; C. Q. Liu; S. C. Xu; Z. M. Du; L. D. Wang; W. D. Fei

doi:10.1201/b21118-71

Effect of SnO₂ coating content on the microstructure of AL₁₈B₄o₃₃w/6061AL composite extruded at 350 °C

P. T. Zhao
, C. Q. Liu
, S. C. Xu
, Z. M. Du
, L. D. Wang
, W. D. Fei

China Electronics Technology Group Corporation
Dalian Jiaotong University
Jilin Normal University
Harbin Institute of Technology

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

Abstract

SnO₂-coated Al₁₈B₄O₃₃ whisker reinforced 6061Al matrix composites were fabricated using squeeze casting method, and extruded at 350 °C. The texture and microstructure of the extruded composites were studied by ω-scan X-ray diffraction, SEM and TEM techniques. The results indicate that both <111> and <100> fiber textures coexist in the matrix of all extruded composites, and <111> texture is stronger than <100> texture. The dispersion degrees of textures increase with the SnO₂ coating content.

Original language	English
Title of host publication	Material Science and Engineering - Proceedings of the 3rd Annual International Conference on Material Science and Engineering, ICMSE 2015
Editors	Ping Chen
Publisher	CRC Press/Balkema
Pages	327-331
Number of pages	5
ISBN (Print)	9781138029361
DOIs	https://doi.org/10.1201/b21118-71
State	Published - 2016
Externally published	Yes
Event	3rd Annual International Conference on Material Science and Engineering, ICMSE 2015 - Guangzhou, China Duration: 15 May 2015 → 17 May 2015

Publication series

Name	Material Science and Engineering - Proceedings of the 3rd Annual International Conference on Material Science and Engineering, ICMSE 2015

Conference

Conference	3rd Annual International Conference on Material Science and Engineering, ICMSE 2015
Country/Territory	China
City	Guangzhou
Period	15/05/15 → 17/05/15

Keywords

AlBO whisker
Aluminum matrix composite
Extrusion texture

Access to Document

10.1201/b21118-71

Cite this

Zhao, P. T., Liu, C. Q., Xu, S. C., Du, Z. M., Wang, L. D., & Fei, W. D. (2016). Effect of SnO₂ coating content on the microstructure of AL₁₈B₄o₃₃w/6061AL composite extruded at 350 °C. In P. Chen (Ed.), Material Science and Engineering - Proceedings of the 3rd Annual International Conference on Material Science and Engineering, ICMSE 2015 (pp. 327-331). (Material Science and Engineering - Proceedings of the 3rd Annual International Conference on Material Science and Engineering, ICMSE 2015). CRC Press/Balkema. https://doi.org/10.1201/b21118-71

Zhao, P. T. ; Liu, C. Q. ; Xu, S. C. et al. / Effect of SnO₂ coating content on the microstructure of AL₁₈B₄o₃₃w/6061AL composite extruded at 350 °C. Material Science and Engineering - Proceedings of the 3rd Annual International Conference on Material Science and Engineering, ICMSE 2015. editor / Ping Chen. CRC Press/Balkema, 2016. pp. 327-331 (Material Science and Engineering - Proceedings of the 3rd Annual International Conference on Material Science and Engineering, ICMSE 2015).

@inproceedings{1381d7ed20134c37a17d4f8bde46abb5,

title = "Effect of SnO2 coating content on the microstructure of AL18B4o33w/6061AL composite extruded at 350 °C",

abstract = "SnO2-coated Al18B4O33 whisker reinforced 6061Al matrix composites were fabricated using squeeze casting method, and extruded at 350 °C. The texture and microstructure of the extruded composites were studied by ω-scan X-ray diffraction, SEM and TEM techniques. The results indicate that both <111> and <100> fiber textures coexist in the matrix of all extruded composites, and <111> texture is stronger than <100> texture. The dispersion degrees of textures increase with the SnO2 coating content.",

keywords = "AlBO whisker, Aluminum matrix composite, Extrusion texture",

author = "Zhao, \{P. T.\} and Liu, \{C. Q.\} and Xu, \{S. C.\} and Du, \{Z. M.\} and Wang, \{L. D.\} and Fei, \{W. D.\}",

note = "Publisher Copyright: {\textcopyright} 2016 Taylor \& Francis Group, London.; 3rd Annual International Conference on Material Science and Engineering, ICMSE 2015 ; Conference date: 15-05-2015 Through 17-05-2015",

year = "2016",

doi = "10.1201/b21118-71",

language = "英语",

isbn = "9781138029361",

series = "Material Science and Engineering - Proceedings of the 3rd Annual International Conference on Material Science and Engineering, ICMSE 2015",

publisher = "CRC Press/Balkema",

pages = "327--331",

editor = "Ping Chen",

booktitle = "Material Science and Engineering - Proceedings of the 3rd Annual International Conference on Material Science and Engineering, ICMSE 2015",

}

Zhao, PT, Liu, CQ, Xu, SC, Du, ZM , Wang, LD & Fei, WD 2016, Effect of SnO₂ coating content on the microstructure of AL₁₈B₄o₃₃w/6061AL composite extruded at 350 °C. in P Chen (ed.), Material Science and Engineering - Proceedings of the 3rd Annual International Conference on Material Science and Engineering, ICMSE 2015. Material Science and Engineering - Proceedings of the 3rd Annual International Conference on Material Science and Engineering, ICMSE 2015, CRC Press/Balkema, pp. 327-331, 3rd Annual International Conference on Material Science and Engineering, ICMSE 2015, Guangzhou, China, 15/05/15. https://doi.org/10.1201/b21118-71

Effect of SnO₂ coating content on the microstructure of AL₁₈B₄o₃₃w/6061AL composite extruded at 350 °C. / Zhao, P. T.; Liu, C. Q.; Xu, S. C. et al.
Material Science and Engineering - Proceedings of the 3rd Annual International Conference on Material Science and Engineering, ICMSE 2015. ed. / Ping Chen. CRC Press/Balkema, 2016. p. 327-331 (Material Science and Engineering - Proceedings of the 3rd Annual International Conference on Material Science and Engineering, ICMSE 2015).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - Effect of SnO2 coating content on the microstructure of AL18B4o33w/6061AL composite extruded at 350 °C

AU - Zhao, P. T.

AU - Liu, C. Q.

AU - Xu, S. C.

AU - Du, Z. M.

AU - Wang, L. D.

AU - Fei, W. D.

PY - 2016

Y1 - 2016

N2 - SnO2-coated Al18B4O33 whisker reinforced 6061Al matrix composites were fabricated using squeeze casting method, and extruded at 350 °C. The texture and microstructure of the extruded composites were studied by ω-scan X-ray diffraction, SEM and TEM techniques. The results indicate that both <111> and <100> fiber textures coexist in the matrix of all extruded composites, and <111> texture is stronger than <100> texture. The dispersion degrees of textures increase with the SnO2 coating content.

AB - SnO2-coated Al18B4O33 whisker reinforced 6061Al matrix composites were fabricated using squeeze casting method, and extruded at 350 °C. The texture and microstructure of the extruded composites were studied by ω-scan X-ray diffraction, SEM and TEM techniques. The results indicate that both <111> and <100> fiber textures coexist in the matrix of all extruded composites, and <111> texture is stronger than <100> texture. The dispersion degrees of textures increase with the SnO2 coating content.

KW - AlBO whisker

KW - Aluminum matrix composite

KW - Extrusion texture

UR - https://www.scopus.com/pages/publications/85017009469

U2 - 10.1201/b21118-71

DO - 10.1201/b21118-71

M3 - 会议稿件

AN - SCOPUS:85017009469

SN - 9781138029361

T3 - Material Science and Engineering - Proceedings of the 3rd Annual International Conference on Material Science and Engineering, ICMSE 2015

SP - 327

EP - 331

BT - Material Science and Engineering - Proceedings of the 3rd Annual International Conference on Material Science and Engineering, ICMSE 2015

A2 - Chen, Ping

PB - CRC Press/Balkema

T2 - 3rd Annual International Conference on Material Science and Engineering, ICMSE 2015

Y2 - 15 May 2015 through 17 May 2015

ER -

Zhao PT, Liu CQ, Xu SC, Du ZM , Wang LD , Fei WD. Effect of SnO₂ coating content on the microstructure of AL₁₈B₄o₃₃w/6061AL composite extruded at 350 °C. In Chen P, editor, Material Science and Engineering - Proceedings of the 3rd Annual International Conference on Material Science and Engineering, ICMSE 2015. CRC Press/Balkema. 2016. p. 327-331. (Material Science and Engineering - Proceedings of the 3rd Annual International Conference on Material Science and Engineering, ICMSE 2015). doi: 10.1201/b21118-71