Effect of reinforcement content on microstructure and mechanical properties of in situ (TiBW+TiCP)/(Ti-4.0Fe-7.3Mo-5.2Cr) composite

R. Zhou; Y. Zhou; D. C. Jia; Z. H. Yang; X. M. Duan

Effect of reinforcement content on microstructure and mechanical properties of in situ (TiB_W+TiC_P)/(Ti-4.0Fe-7.3Mo-5.2Cr) composite

R. Zhou
, Y. Zhou
, D. C. Jia
, Z. H. Yang
, X. M. Duan

Harbin Institute of Technology

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

Abstract

Titanium alloys have a wide application as its good toughness and strength, but these alloys have relative low abrasion resistance. However, this short coming can be addressed by fabricating titanium matrix composites. (TiB _w+TiC_p)/(Ti-4.0Fe-7.3Mo-5.2Cr), the composites with TiB: TiC=1: 1 but different reinforcement content have been prepared by using in situ reaction between B₄C, C, Cr₃C₂ and titanium powders with the changing the proportions. The mixtures were hot pressed at 1300 °C, under a pressure of 20 MPa for 1 hour in Ar atmosphere and both the microstructure and mechanical properties of the composites have been investigated. XRD and SEM results show that the reinforcement content can affect both the matrix and reinforcing phase. Additionally, the reinforcement content can also influence the morphology of in situ formed TiB_w and TiC _p reinforcements.

Original language	English
Title of host publication	ECCM 2012 - Composites at Venice, Proceedings of the 15th European Conference on Composite Materials
Publisher	European Conference on Composite Materials, ECCM
ISBN (Print)	9788888785332
State	Published - 2012
Externally published	Yes
Event	15th European Conference on Composite Materials: Composites at Venice, ECCM 2012 - Venice, Italy Duration: 24 Jun 2012 → 28 Jun 2012

Publication series

Name	ECCM 2012 - Composites at Venice, Proceedings of the 15th European Conference on Composite Materials

Conference

Conference	15th European Conference on Composite Materials: Composites at Venice, ECCM 2012
Country/Territory	Italy
City	Venice
Period	24/06/12 → 28/06/12

Keywords

Mechanical properties
Microstructure
Ti-4.0Fe-7.3Mo-5.2Cr

Cite this

Zhou, R., Zhou, Y., Jia, D. C., Yang, Z. H., & Duan, X. M. (2012). Effect of reinforcement content on microstructure and mechanical properties of in situ (TiB_W+TiC_P)/(Ti-4.0Fe-7.3Mo-5.2Cr) composite. In ECCM 2012 - Composites at Venice, Proceedings of the 15th European Conference on Composite Materials (ECCM 2012 - Composites at Venice, Proceedings of the 15th European Conference on Composite Materials). European Conference on Composite Materials, ECCM.

Zhou, R. ; Zhou, Y. ; Jia, D. C. et al. / Effect of reinforcement content on microstructure and mechanical properties of in situ (TiB_W+TiC_P)/(Ti-4.0Fe-7.3Mo-5.2Cr) composite. ECCM 2012 - Composites at Venice, Proceedings of the 15th European Conference on Composite Materials. European Conference on Composite Materials, ECCM, 2012. (ECCM 2012 - Composites at Venice, Proceedings of the 15th European Conference on Composite Materials).

@inproceedings{73f10d243be54bfd9a5ddde433d4796a,

title = "Effect of reinforcement content on microstructure and mechanical properties of in situ (TiBW+TiCP)/(Ti-4.0Fe-7.3Mo-5.2Cr) composite",

abstract = "Titanium alloys have a wide application as its good toughness and strength, but these alloys have relative low abrasion resistance. However, this short coming can be addressed by fabricating titanium matrix composites. (TiB w+TiCp)/(Ti-4.0Fe-7.3Mo-5.2Cr), the composites with TiB: TiC=1: 1 but different reinforcement content have been prepared by using in situ reaction between B4C, C, Cr3C2 and titanium powders with the changing the proportions. The mixtures were hot pressed at 1300 °C, under a pressure of 20 MPa for 1 hour in Ar atmosphere and both the microstructure and mechanical properties of the composites have been investigated. XRD and SEM results show that the reinforcement content can affect both the matrix and reinforcing phase. Additionally, the reinforcement content can also influence the morphology of in situ formed TiBw and TiC p reinforcements.",

keywords = "Mechanical properties, Microstructure, Ti-4.0Fe-7.3Mo-5.2Cr",

author = "R. Zhou and Y. Zhou and Jia, \{D. C.\} and Yang, \{Z. H.\} and Duan, \{X. M.\}",

year = "2012",

language = "英语",

isbn = "9788888785332",

series = "ECCM 2012 - Composites at Venice, Proceedings of the 15th European Conference on Composite Materials",

publisher = "European Conference on Composite Materials, ECCM",

booktitle = "ECCM 2012 - Composites at Venice, Proceedings of the 15th European Conference on Composite Materials",

note = "15th European Conference on Composite Materials: Composites at Venice, ECCM 2012 ; Conference date: 24-06-2012 Through 28-06-2012",

}

Zhou, R, Zhou, Y , Jia, DC , Yang, ZH & Duan, XM 2012, Effect of reinforcement content on microstructure and mechanical properties of in situ (TiB_W+TiC_P)/(Ti-4.0Fe-7.3Mo-5.2Cr) composite. in ECCM 2012 - Composites at Venice, Proceedings of the 15th European Conference on Composite Materials. ECCM 2012 - Composites at Venice, Proceedings of the 15th European Conference on Composite Materials, European Conference on Composite Materials, ECCM, 15th European Conference on Composite Materials: Composites at Venice, ECCM 2012, Venice, Italy, 24/06/12.

Effect of reinforcement content on microstructure and mechanical properties of in situ (TiB_W+TiC_P)/(Ti-4.0Fe-7.3Mo-5.2Cr) composite. / Zhou, R.; Zhou, Y.; Jia, D. C. et al.
ECCM 2012 - Composites at Venice, Proceedings of the 15th European Conference on Composite Materials. European Conference on Composite Materials, ECCM, 2012. (ECCM 2012 - Composites at Venice, Proceedings of the 15th European Conference on Composite Materials).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - Effect of reinforcement content on microstructure and mechanical properties of in situ (TiBW+TiCP)/(Ti-4.0Fe-7.3Mo-5.2Cr) composite

AU - Zhou, R.

AU - Zhou, Y.

AU - Jia, D. C.

AU - Yang, Z. H.

AU - Duan, X. M.

PY - 2012

Y1 - 2012

N2 - Titanium alloys have a wide application as its good toughness and strength, but these alloys have relative low abrasion resistance. However, this short coming can be addressed by fabricating titanium matrix composites. (TiB w+TiCp)/(Ti-4.0Fe-7.3Mo-5.2Cr), the composites with TiB: TiC=1: 1 but different reinforcement content have been prepared by using in situ reaction between B4C, C, Cr3C2 and titanium powders with the changing the proportions. The mixtures were hot pressed at 1300 °C, under a pressure of 20 MPa for 1 hour in Ar atmosphere and both the microstructure and mechanical properties of the composites have been investigated. XRD and SEM results show that the reinforcement content can affect both the matrix and reinforcing phase. Additionally, the reinforcement content can also influence the morphology of in situ formed TiBw and TiC p reinforcements.

AB - Titanium alloys have a wide application as its good toughness and strength, but these alloys have relative low abrasion resistance. However, this short coming can be addressed by fabricating titanium matrix composites. (TiB w+TiCp)/(Ti-4.0Fe-7.3Mo-5.2Cr), the composites with TiB: TiC=1: 1 but different reinforcement content have been prepared by using in situ reaction between B4C, C, Cr3C2 and titanium powders with the changing the proportions. The mixtures were hot pressed at 1300 °C, under a pressure of 20 MPa for 1 hour in Ar atmosphere and both the microstructure and mechanical properties of the composites have been investigated. XRD and SEM results show that the reinforcement content can affect both the matrix and reinforcing phase. Additionally, the reinforcement content can also influence the morphology of in situ formed TiBw and TiC p reinforcements.

KW - Mechanical properties

KW - Microstructure

KW - Ti-4.0Fe-7.3Mo-5.2Cr

UR - https://www.scopus.com/pages/publications/84903978157

M3 - 会议稿件

AN - SCOPUS:84903978157

SN - 9788888785332

T3 - ECCM 2012 - Composites at Venice, Proceedings of the 15th European Conference on Composite Materials

BT - ECCM 2012 - Composites at Venice, Proceedings of the 15th European Conference on Composite Materials

PB - European Conference on Composite Materials, ECCM

T2 - 15th European Conference on Composite Materials: Composites at Venice, ECCM 2012

Y2 - 24 June 2012 through 28 June 2012

ER -

Zhou R, Zhou Y , Jia DC , Yang ZH, Duan XM. Effect of reinforcement content on microstructure and mechanical properties of in situ (TiB_W+TiC_P)/(Ti-4.0Fe-7.3Mo-5.2Cr) composite. In ECCM 2012 - Composites at Venice, Proceedings of the 15th European Conference on Composite Materials. European Conference on Composite Materials, ECCM. 2012. (ECCM 2012 - Composites at Venice, Proceedings of the 15th European Conference on Composite Materials).