Skip to main navigation Skip to search Skip to main content

Effect of magnesium content on the corrosion behaviors of Grf/Al composite

  • Harbin Institute of Technology

Research output: Contribution to journalArticlepeer-review

Abstract

Graphite-fiber-reinforced aluminum composites (Grf/Al) with different magnesium content were fabricated with the pressure infiltration method. Their corrosion behaviors were investigated by potentiodynamic polarization measurements, immersion tests, electrochemical impedance spectroscopy (EIS) analysis, and scanning electron microscopy (SEM). Both the corrosion potential (E corr) and the pitting potential (E pit) decreased with the increase of magnesium content, whereas the corrosion current density (i corr) decreased sharply at first and then increased slightly. The i corr of Grf/Al-3.2Mg was the lowest among the four composites with different magnesium contents, which indicated that Grf/Al-3.2Mg had the best corrosion resistance. EIS showed that the capacitive reactance of Grf/Al-8.5Mg was 1682 Ω × cm-2, which was the worst, whereas that of Gr f/Al-3.2Mg was 3498 Ω × cm-2, which was the best. SEM results revealed that magnesium and silicon formed the Mg 2Si phase in Grf/Al-3.2Mg, which hindered the extension of corrosion crack and improved the corrosion resistance.

Original languageEnglish
Pages (from-to)3458-3462
Number of pages5
JournalMetallurgical and Materials Transactions A: Physical Metallurgy and Materials Science
Volume41
Issue number13
DOIs
StatePublished - Dec 2010
Externally publishedYes

Fingerprint

Dive into the research topics of 'Effect of magnesium content on the corrosion behaviors of Grf/Al composite'. Together they form a unique fingerprint.

Cite this