Effect of iron additive on the sintering behavior of hot-pressed ZrC-W composites

Yu Jin Wang; Lei Chen; Taiquan Zhang; Yu Zhou

doi:10.4028/0-87849-473-1.1764

Effect of iron additive on the sintering behavior of hot-pressed ZrC-W composites

Yu Jin Wang^*
, Lei Chen
, Taiquan Zhang
, Yu Zhou

^*Corresponding author for this work

Harbin Institute of Technology

Research output: Contribution to journal › Article › peer-review

2 Scopus citations

Abstract

The ZrC-W composites with iron as sintering additive were fabricated by hot-press sintering. The densification, microstructure and mechanical properties of the composites were investigated. The incorporation of Fe beneficially promotes the densification of ZrC-W composites. The relative density of the composite sintered at 1900°C can attain 95.3%. W₂C phase is also found in the ZrC-W composite sintered at 1700°C The content of W ₂C decreases with the increase of sintering temperature. However, W₂C phase is not identified in the composite sintered at 1900°C The flexural strength and fracture toughness of the composites are strongly dependent on sintering temperature. The flexural strength and fracture toughness of ZrC-W composite sintered at optimized temperature of 1800°C are 438 MPa and 3.99 MPa·m^1/2, respectively.

Original language	English
Pages (from-to)	1764-1766
Number of pages	3
Journal	Key Engineering Materials
Volume	368-372 PART 2
DOIs	https://doi.org/10.4028/0-87849-473-1.1764
State	Published - 2008

Keywords

Iron additive
Mechanical properties
Microstructure
ZrC-W composite

Access to Document

10.4028/0-87849-473-1.1764

Cite this

@article{8a35eda1b3cd4db38f27f937482722a6,

title = "Effect of iron additive on the sintering behavior of hot-pressed ZrC-W composites",

abstract = "The ZrC-W composites with iron as sintering additive were fabricated by hot-press sintering. The densification, microstructure and mechanical properties of the composites were investigated. The incorporation of Fe beneficially promotes the densification of ZrC-W composites. The relative density of the composite sintered at 1900°C can attain 95.3\%. W2C phase is also found in the ZrC-W composite sintered at 1700°C The content of W 2C decreases with the increase of sintering temperature. However, W2C phase is not identified in the composite sintered at 1900°C The flexural strength and fracture toughness of the composites are strongly dependent on sintering temperature. The flexural strength and fracture toughness of ZrC-W composite sintered at optimized temperature of 1800°C are 438 MPa and 3.99 MPa·m1/2, respectively.",

keywords = "Iron additive, Mechanical properties, Microstructure, ZrC-W composite",

author = "Wang, \{Yu Jin\} and Lei Chen and Taiquan Zhang and Yu Zhou",

year = "2008",

doi = "10.4028/0-87849-473-1.1764",

language = "英语",

volume = "368-372 PART 2",

pages = "1764--1766",

journal = "Key Engineering Materials",

issn = "1013-9826",

publisher = "Trans Tech Publications Ltd",

}

TY - JOUR

T1 - Effect of iron additive on the sintering behavior of hot-pressed ZrC-W composites

AU - Wang, Yu Jin

AU - Chen, Lei

AU - Zhang, Taiquan

AU - Zhou, Yu

PY - 2008

Y1 - 2008

N2 - The ZrC-W composites with iron as sintering additive were fabricated by hot-press sintering. The densification, microstructure and mechanical properties of the composites were investigated. The incorporation of Fe beneficially promotes the densification of ZrC-W composites. The relative density of the composite sintered at 1900°C can attain 95.3%. W2C phase is also found in the ZrC-W composite sintered at 1700°C The content of W 2C decreases with the increase of sintering temperature. However, W2C phase is not identified in the composite sintered at 1900°C The flexural strength and fracture toughness of the composites are strongly dependent on sintering temperature. The flexural strength and fracture toughness of ZrC-W composite sintered at optimized temperature of 1800°C are 438 MPa and 3.99 MPa·m1/2, respectively.

AB - The ZrC-W composites with iron as sintering additive were fabricated by hot-press sintering. The densification, microstructure and mechanical properties of the composites were investigated. The incorporation of Fe beneficially promotes the densification of ZrC-W composites. The relative density of the composite sintered at 1900°C can attain 95.3%. W2C phase is also found in the ZrC-W composite sintered at 1700°C The content of W 2C decreases with the increase of sintering temperature. However, W2C phase is not identified in the composite sintered at 1900°C The flexural strength and fracture toughness of the composites are strongly dependent on sintering temperature. The flexural strength and fracture toughness of ZrC-W composite sintered at optimized temperature of 1800°C are 438 MPa and 3.99 MPa·m1/2, respectively.

KW - Iron additive

KW - Mechanical properties

KW - Microstructure

KW - ZrC-W composite

UR - https://www.scopus.com/pages/publications/40949090115

U2 - 10.4028/0-87849-473-1.1764

DO - 10.4028/0-87849-473-1.1764

M3 - 文章

AN - SCOPUS:40949090115

SN - 1013-9826

VL - 368-372 PART 2

SP - 1764

EP - 1766

JO - Key Engineering Materials

JF - Key Engineering Materials

ER -

Effect of iron additive on the sintering behavior of hot-pressed ZrC-W composites

Abstract

Keywords

Access to Document

Other files and links

Fingerprint

Cite this