Effect of brazing parameters on microstructure and mechanical properties of Ti5Si3/Ti3Al composite joints brazed with Ti–Zr–Cu–Ni filler alloy

Tongtong Zhang; Yongsheng He; Guohua Fan; Kaixuan Wang; Xianghong Liu; Lin Geng

doi:10.1007/s40194-021-01072-9

Effect of brazing parameters on microstructure and mechanical properties of Ti₅Si₃/Ti₃Al composite joints brazed with Ti–Zr–Cu–Ni filler alloy

Tongtong Zhang^*
, Yongsheng He
, Guohua Fan
, Kaixuan Wang
, Xianghong Liu
, Lin Geng

^*Corresponding author for this work

Western Superconducting Technologies Co., Ltd.
Harbin Institute of Technology

Research output: Contribution to journal › Article › peer-review

4 Scopus citations

Abstract

In this study, Ti₅Si₃/Ti₃Al composite was successfully vacuum-brazed with Ti-33Zr-16Cu-13Ni (wt.%) filler alloy. The typical interfacial microstructure of the joints presented a symmetrical characteristic, which mainly consisted of Ti₃Al, Ti₂Ni, and α-Ti phases. The effects of brazing temperature and holding time on the interfacial microstructure and mechanical properties of the joints were investigated in details. The optimized average shear strength of 224 MPa was obtained when brazing at 900 °C for 5 min. The high temperature shear strength of the joints reached 377 and 405 MPa at 600 and 650 °C, respectively. In addition, the microstructure evolution mechanism of the joints was put forward based on the experimental analysis.

Original language	English
Pages (from-to)	1171-1180
Number of pages	10
Journal	Welding in the World, Le Soudage Dans Le Monde
Volume	65
Issue number	6
DOIs	https://doi.org/10.1007/s40194-021-01072-9
State	Published - Jun 2021
Externally published	Yes

Keywords

Brazing
Interfacial microstructure
Mechanical properties
TiSi/TiAl composite
Ti–Zr–Cu–Ni

Access to Document

10.1007/s40194-021-01072-9

Cite this

@article{231e36ed92d64344ba1297cbcd5ddbff,

title = "Effect of brazing parameters on microstructure and mechanical properties of Ti5Si3/Ti3Al composite joints brazed with Ti–Zr–Cu–Ni filler alloy",

abstract = "In this study, Ti5Si3/Ti3Al composite was successfully vacuum-brazed with Ti-33Zr-16Cu-13Ni (wt.\%) filler alloy. The typical interfacial microstructure of the joints presented a symmetrical characteristic, which mainly consisted of Ti3Al, Ti2Ni, and α-Ti phases. The effects of brazing temperature and holding time on the interfacial microstructure and mechanical properties of the joints were investigated in details. The optimized average shear strength of 224 MPa was obtained when brazing at 900 °C for 5 min. The high temperature shear strength of the joints reached 377 and 405 MPa at 600 and 650 °C, respectively. In addition, the microstructure evolution mechanism of the joints was put forward based on the experimental analysis.",

keywords = "Brazing, Interfacial microstructure, Mechanical properties, TiSi/TiAl composite, Ti–Zr–Cu–Ni",

author = "Tongtong Zhang and Yongsheng He and Guohua Fan and Kaixuan Wang and Xianghong Liu and Lin Geng",

note = "Publisher Copyright: {\textcopyright} 2021, International Institute of Welding.",

year = "2021",

month = jun,

doi = "10.1007/s40194-021-01072-9",

language = "英语",

volume = "65",

pages = "1171--1180",

journal = "Welding in the World, Le Soudage Dans Le Monde",

issn = "0043-2288",

publisher = "Springer Science and Business Media Deutschland GmbH",

number = "6",

}

TY - JOUR

T1 - Effect of brazing parameters on microstructure and mechanical properties of Ti5Si3/Ti3Al composite joints brazed with Ti–Zr–Cu–Ni filler alloy

AU - Zhang, Tongtong

AU - He, Yongsheng

AU - Fan, Guohua

AU - Wang, Kaixuan

AU - Liu, Xianghong

AU - Geng, Lin

PY - 2021/6

Y1 - 2021/6

N2 - In this study, Ti5Si3/Ti3Al composite was successfully vacuum-brazed with Ti-33Zr-16Cu-13Ni (wt.%) filler alloy. The typical interfacial microstructure of the joints presented a symmetrical characteristic, which mainly consisted of Ti3Al, Ti2Ni, and α-Ti phases. The effects of brazing temperature and holding time on the interfacial microstructure and mechanical properties of the joints were investigated in details. The optimized average shear strength of 224 MPa was obtained when brazing at 900 °C for 5 min. The high temperature shear strength of the joints reached 377 and 405 MPa at 600 and 650 °C, respectively. In addition, the microstructure evolution mechanism of the joints was put forward based on the experimental analysis.

AB - In this study, Ti5Si3/Ti3Al composite was successfully vacuum-brazed with Ti-33Zr-16Cu-13Ni (wt.%) filler alloy. The typical interfacial microstructure of the joints presented a symmetrical characteristic, which mainly consisted of Ti3Al, Ti2Ni, and α-Ti phases. The effects of brazing temperature and holding time on the interfacial microstructure and mechanical properties of the joints were investigated in details. The optimized average shear strength of 224 MPa was obtained when brazing at 900 °C for 5 min. The high temperature shear strength of the joints reached 377 and 405 MPa at 600 and 650 °C, respectively. In addition, the microstructure evolution mechanism of the joints was put forward based on the experimental analysis.

KW - Brazing

KW - Interfacial microstructure

KW - Mechanical properties

KW - TiSi/TiAl composite

KW - Ti–Zr–Cu–Ni

UR - https://www.scopus.com/pages/publications/85101693102

U2 - 10.1007/s40194-021-01072-9

DO - 10.1007/s40194-021-01072-9

M3 - 文章

AN - SCOPUS:85101693102

SN - 0043-2288

VL - 65

SP - 1171

EP - 1180

JO - Welding in the World, Le Soudage Dans Le Monde

JF - Welding in the World, Le Soudage Dans Le Monde

IS - 6

ER -

Effect of brazing parameters on microstructure and mechanical properties of Ti₅Si₃/Ti₃Al composite joints brazed with Ti–Zr–Cu–Ni filler alloy

Abstract

Keywords

Access to Document

Other files and links

Fingerprint

Cite this