Effect of Brasssheathing on ECAP of Ti-6Al-4V Alloy by Deform-3D Simulation and Experimentalanalysis

Zhiyong Zhao; Hongliang Hou; Yanling Zhang; Yaoqi Wang; Guofeng Wang

doi:10.1088/1757-899X/301/1/012077

Effect of Brasssheathing on ECAP of Ti-6Al-4V Alloy by Deform-3D Simulation and Experimentalanalysis

Zhiyong Zhao
, Hongliang Hou^*
, Yanling Zhang
, Yaoqi Wang
, Guofeng Wang

^*Corresponding author for this work

School of Materials Science and Engineering

China Aviation Industry Corporation
Harbin Institute of Technology
Aeronautical Key Laboratory for Plastic Technology
Beijing Key Laboratory for Plastic Technology and Equipment

Research output: Contribution to journal › Conference article › peer-review

4 Scopus citations

Abstract

The Deform-3D software was used to simulate and analyze the equal channel angular pressing (ECAP) of Ti-6Al-4V alloy with and without brass sheathing. The results show that the Ti-6Al-4V alloy samples with and without brass sheathing is both maintain a regular shape after ECAP. The effective strain of points on the cross section of sample with brass sheathing is smaller than that of sample without brass sheathing, but the extrusion load of sample with brass sheathing is smaller, and the difficulty of Ti-6Al-4V alloyin ECAP process was reduced. The experimental result also proves the feasibility of ECAP of Ti-6Al-4V alloy with brass sheathing, and the change of microstructure is accord with the deformation characteristic of ECAP.

Original language	English
Article number	012077
Journal	IOP Conference Series: Materials Science and Engineering
Volume	301
Issue number	1
DOIs	https://doi.org/10.1088/1757-899X/301/1/012077
State	Published - 15 Feb 2018
Event	5th Annual International Conference on Material Science and Environmental Engineering, MSEE 2017 - Xiamen, Fujian, China Duration: 15 Dec 2017 → 17 Dec 2017

Access to Document

10.1088/1757-899X/301/1/012077

Cite this

@article{572c8a8f23304b33b3374627d2a343d9,

title = "Effect of Brasssheathing on ECAP of Ti-6Al-4V Alloy by Deform-3D Simulation and Experimentalanalysis",

abstract = "The Deform-3D software was used to simulate and analyze the equal channel angular pressing (ECAP) of Ti-6Al-4V alloy with and without brass sheathing. The results show that the Ti-6Al-4V alloy samples with and without brass sheathing is both maintain a regular shape after ECAP. The effective strain of points on the cross section of sample with brass sheathing is smaller than that of sample without brass sheathing, but the extrusion load of sample with brass sheathing is smaller, and the difficulty of Ti-6Al-4V alloyin ECAP process was reduced. The experimental result also proves the feasibility of ECAP of Ti-6Al-4V alloy with brass sheathing, and the change of microstructure is accord with the deformation characteristic of ECAP.",

author = "Zhiyong Zhao and Hongliang Hou and Yanling Zhang and Yaoqi Wang and Guofeng Wang",

note = "Publisher Copyright: {\textcopyright} Published under licence by IOP Publishing Ltd.; 5th Annual International Conference on Material Science and Environmental Engineering, MSEE 2017 ; Conference date: 15-12-2017 Through 17-12-2017",

year = "2018",

month = feb,

day = "15",

doi = "10.1088/1757-899X/301/1/012077",

language = "英语",

volume = "301",

journal = "IOP Conference Series: Materials Science and Engineering",

issn = "1757-8981",

publisher = "IOP Publishing Ltd.",

number = "1",

}

TY - JOUR

T1 - Effect of Brasssheathing on ECAP of Ti-6Al-4V Alloy by Deform-3D Simulation and Experimentalanalysis

AU - Zhao, Zhiyong

AU - Hou, Hongliang

AU - Zhang, Yanling

AU - Wang, Yaoqi

AU - Wang, Guofeng

N1 - Publisher Copyright: © Published under licence by IOP Publishing Ltd.

PY - 2018/2/15

Y1 - 2018/2/15

N2 - The Deform-3D software was used to simulate and analyze the equal channel angular pressing (ECAP) of Ti-6Al-4V alloy with and without brass sheathing. The results show that the Ti-6Al-4V alloy samples with and without brass sheathing is both maintain a regular shape after ECAP. The effective strain of points on the cross section of sample with brass sheathing is smaller than that of sample without brass sheathing, but the extrusion load of sample with brass sheathing is smaller, and the difficulty of Ti-6Al-4V alloyin ECAP process was reduced. The experimental result also proves the feasibility of ECAP of Ti-6Al-4V alloy with brass sheathing, and the change of microstructure is accord with the deformation characteristic of ECAP.

AB - The Deform-3D software was used to simulate and analyze the equal channel angular pressing (ECAP) of Ti-6Al-4V alloy with and without brass sheathing. The results show that the Ti-6Al-4V alloy samples with and without brass sheathing is both maintain a regular shape after ECAP. The effective strain of points on the cross section of sample with brass sheathing is smaller than that of sample without brass sheathing, but the extrusion load of sample with brass sheathing is smaller, and the difficulty of Ti-6Al-4V alloyin ECAP process was reduced. The experimental result also proves the feasibility of ECAP of Ti-6Al-4V alloy with brass sheathing, and the change of microstructure is accord with the deformation characteristic of ECAP.

UR - https://www.scopus.com/pages/publications/85045279630

U2 - 10.1088/1757-899X/301/1/012077

DO - 10.1088/1757-899X/301/1/012077

M3 - 会议文章

AN - SCOPUS:85045279630

SN - 1757-8981

VL - 301

JO - IOP Conference Series: Materials Science and Engineering

JF - IOP Conference Series: Materials Science and Engineering

IS - 1

M1 - 012077

T2 - 5th Annual International Conference on Material Science and Environmental Engineering, MSEE 2017

Y2 - 15 December 2017 through 17 December 2017

ER -

Effect of Brasssheathing on ECAP of Ti-6Al-4V Alloy by Deform-3D Simulation and Experimentalanalysis

Abstract

Access to Document

Other files and links

Fingerprint

Cite this