Dynamic Parameters Identification of Serial Robot Based on Dual Quaternion

This paper studies the dynamic parameters identification problem of load and linkages of a serial robot in the presence of model uncertainty. The dynamic parameters of load and linkages of a serial robot have been identified through a combination procedure, which is useful for different platforms of serial robot systems. The purpose of this paper is to propose a dynamic parameter identification method for a serial robot based on a dual quaternion. Using the information of the force and torque of the load obtained by the six-dimensional force sensor installed on the end-effector of the robot, the dynamics parameter identification matrix of the load is derived, which also uses the information of motion speed and acceleration of the end-effector. On the other hand, the analysis of the dynamic relationship between adjacent linkages and the joints is based on dual quaternion algebra, and the identification matrix for the dynamic parameters and the difference values of associated linkages are derived, as well. The combination procedure of the method is flexible in the application of dynamic parameters identification for a serial robot using a dual quaternion. Furthermore, the proposed DQ (dual quaternion)-based method in this paper has the advantage of lower cost compared with the RBFNN (radial basis function neural network)-based method. The effectiveness of the proposed dynamic parameter identification method for a serial robot has been verified by relevant experiments.