Driving Force and Blossoming Analysis of a Composite Triangular Rollable and Collapsible (TRAC) Boom Used in Aerospace Technologies

Deployable and foldable tape-spring booms are widely used in aerospace technologies, especially for large-scale membrane structures. Semi-circular (STEM) and lenticular (CTM) boom cross-sections were invented for specific applications since these configurations have either a concise structure or a high twisting stiffness. Moreover, a triangular cross-section (TRAC) boom was proposed years ago, as its more scattered configuration could afford a higher bending stiffness after deployment. Meanwhile, blossoming is one of the most serious failure modes during boom deployment, and is commonly caused by a relatively high load acting on the boom tip. For the sake of avoiding blossoming failure, the highest load a boom can withstand should be found theoretically for a better design. This paper aims at acquiring the highest tip load (i.e., driving force) a TRAC boom can withstand through establishing an analytical model. Furthermore, a numerical analysis is carried out to provide some verification, whose modeling and analysis method has been verified by a comparison with the experimental data from previous investigations. The research in this paper gives more guidance for the design of deployable TRAC tape-spring booms.