Detailed assessments of tribological properties of binder jetting printed stainless steel and tungsten carbide infiltrated with bronze

Shaogang Cui; Shenglu Lu; Kiet Tieu; Ganesh Kumar Meenashisundaram; Long Wang; Xiaofeng Li; Jun Wei; Wei Li

doi:10.1016/j.wear.2021.203788

Detailed assessments of tribological properties of binder jetting printed stainless steel and tungsten carbide infiltrated with bronze

Shaogang Cui
, Shenglu Lu^*
, Kiet Tieu
, Ganesh Kumar Meenashisundaram
, Long Wang^*
, Xiaofeng Li
, Jun Wei
, Wei Li

^*Corresponding author for this work

Research output: Contribution to journal › Article › peer-review

23 Scopus citations

Abstract

Tribological behaviors of 316SS/bronze (BJP316), 420SS/bronze (BJP420) and WC/bronze (BJPWC) composites fabricated using binder jetting were evaluated systematically by using a scratch tester and dry reciprocating ball-on-disc tribometer under various loads. The results showed that the BJP316, BJP420 and BJPWC are mainly subjected to delamination, abrasion and spalling damages, respectively. The scratch resistance mainly depends on the soft bronze infiltrant. The friction coefficients in dry sliding all decrease with increasing loads, whereas the wear rates present different trends with loads. All composites exhibit comparable wear resistance to traditionally fabricated counterparts. The findings will help to improve the tribological design of mechanical elements fabricated by binder jetting and lay the foundation for the applications in the tribological field.

Original language	English
Article number	203788
Journal	Wear
Volume	477
DOIs	https://doi.org/10.1016/j.wear.2021.203788
State	Published - 18 Jul 2021
Externally published	Yes

Keywords

Binder jetting
Scratch test
Stainless/bronze composite
Tribological properties

Access to Document

10.1016/j.wear.2021.203788

Cite this

@article{dcc1362387a04a93b5d1e4c8e0991981,

title = "Detailed assessments of tribological properties of binder jetting printed stainless steel and tungsten carbide infiltrated with bronze",

abstract = "Tribological behaviors of 316SS/bronze (BJP316), 420SS/bronze (BJP420) and WC/bronze (BJPWC) composites fabricated using binder jetting were evaluated systematically by using a scratch tester and dry reciprocating ball-on-disc tribometer under various loads. The results showed that the BJP316, BJP420 and BJPWC are mainly subjected to delamination, abrasion and spalling damages, respectively. The scratch resistance mainly depends on the soft bronze infiltrant. The friction coefficients in dry sliding all decrease with increasing loads, whereas the wear rates present different trends with loads. All composites exhibit comparable wear resistance to traditionally fabricated counterparts. The findings will help to improve the tribological design of mechanical elements fabricated by binder jetting and lay the foundation for the applications in the tribological field.",

keywords = "Binder jetting, Scratch test, Stainless/bronze composite, Tribological properties",

author = "Shaogang Cui and Shenglu Lu and Kiet Tieu and Meenashisundaram, \{Ganesh Kumar\} and Long Wang and Xiaofeng Li and Jun Wei and Wei Li",

note = "Publisher Copyright: {\textcopyright} 2021 Elsevier B.V.",

year = "2021",

month = jul,

day = "18",

doi = "10.1016/j.wear.2021.203788",

language = "英语",

volume = "477",

journal = "Wear",

issn = "0043-1648",

publisher = "Elsevier B.V.",

}

TY - JOUR

T1 - Detailed assessments of tribological properties of binder jetting printed stainless steel and tungsten carbide infiltrated with bronze

AU - Cui, Shaogang

AU - Lu, Shenglu

AU - Tieu, Kiet

AU - Meenashisundaram, Ganesh Kumar

AU - Wang, Long

AU - Li, Xiaofeng

AU - Wei, Jun

AU - Li, Wei

PY - 2021/7/18

Y1 - 2021/7/18

N2 - Tribological behaviors of 316SS/bronze (BJP316), 420SS/bronze (BJP420) and WC/bronze (BJPWC) composites fabricated using binder jetting were evaluated systematically by using a scratch tester and dry reciprocating ball-on-disc tribometer under various loads. The results showed that the BJP316, BJP420 and BJPWC are mainly subjected to delamination, abrasion and spalling damages, respectively. The scratch resistance mainly depends on the soft bronze infiltrant. The friction coefficients in dry sliding all decrease with increasing loads, whereas the wear rates present different trends with loads. All composites exhibit comparable wear resistance to traditionally fabricated counterparts. The findings will help to improve the tribological design of mechanical elements fabricated by binder jetting and lay the foundation for the applications in the tribological field.

AB - Tribological behaviors of 316SS/bronze (BJP316), 420SS/bronze (BJP420) and WC/bronze (BJPWC) composites fabricated using binder jetting were evaluated systematically by using a scratch tester and dry reciprocating ball-on-disc tribometer under various loads. The results showed that the BJP316, BJP420 and BJPWC are mainly subjected to delamination, abrasion and spalling damages, respectively. The scratch resistance mainly depends on the soft bronze infiltrant. The friction coefficients in dry sliding all decrease with increasing loads, whereas the wear rates present different trends with loads. All composites exhibit comparable wear resistance to traditionally fabricated counterparts. The findings will help to improve the tribological design of mechanical elements fabricated by binder jetting and lay the foundation for the applications in the tribological field.

KW - Binder jetting

KW - Scratch test

KW - Stainless/bronze composite

KW - Tribological properties

UR - https://www.scopus.com/pages/publications/85109802445

U2 - 10.1016/j.wear.2021.203788

DO - 10.1016/j.wear.2021.203788

M3 - 文章

AN - SCOPUS:85109802445

SN - 0043-1648

VL - 477

JO - Wear

JF - Wear

M1 - 203788

ER -

Detailed assessments of tribological properties of binder jetting printed stainless steel and tungsten carbide infiltrated with bronze

Abstract

Keywords

Access to Document

Other files and links

Fingerprint

Cite this