Design of remote street lamp monitoring and communicating node controller based on spread spectrum carrier

Yuying Yao; Donglai Zhang; Chao Wang; Yong Sun; Dianguo Xu

doi:10.1109/ISIE.2006.295992

Design of remote street lamp monitoring and communicating node controller based on spread spectrum carrier

Yuying Yao^*
, Donglai Zhang
, Chao Wang
, Yong Sun
, Dianguo Xu

^*Corresponding author for this work

School of Electrical Engineering and Automation

Harbin Institute of Technology Shenzhen

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

1 Scopus citations

Abstract

Power Line Carrier (PLC) communication presents an appealing and economical solution for many monitoring systems. SSC (Spread Spectrum Carrier) technology can spread the transmitting bandwidth of the signal so widely that it has attractive features of better anti-interference capability and higher reliability, so it is more suitable for unfriendly low-voltage PLC application than other modulation methods. Firstly, this paper gives a brief introduction of a street lamp monitoring and communicating system; secondly, it describes the structure of the node controller and discusses some key problems such as carrier frequency, wave trap coil and software to improve the performance of low-voltage PLC communication; finally, the experimental result is listed which looks promising for deeper research and application.

Original language	English
Title of host publication	International Symposium on Industrial Electronics 2006, ISIE 2006
Pages	1642-1645
Number of pages	4
DOIs	https://doi.org/10.1109/ISIE.2006.295992
State	Published - 2006
Event	International Symposium on Industrial Electronics 2006, ISIE 2006 - Montreal, QC, Canada Duration: 9 Jul 2006 → 13 Jul 2006

Publication series

Name	IEEE International Symposium on Industrial Electronics
Volume	3

Conference

Conference	International Symposium on Industrial Electronics 2006, ISIE 2006
Country/Territory	Canada
City	Montreal, QC
Period	9/07/06 → 13/07/06

Keywords

Ballast
Power line carrier communication
Spread spectrum carrier
Wave trap coil

Access to Document

10.1109/ISIE.2006.295992

Cite this

Yao, Y., Zhang, D., Wang, C., Sun, Y., & Xu, D. (2006). Design of remote street lamp monitoring and communicating node controller based on spread spectrum carrier. In International Symposium on Industrial Electronics 2006, ISIE 2006 (pp. 1642-1645). Article 4078490 (IEEE International Symposium on Industrial Electronics; Vol. 3). https://doi.org/10.1109/ISIE.2006.295992

@inproceedings{67dd15ffce9243cdaa159fd9bf6f1c75,

title = "Design of remote street lamp monitoring and communicating node controller based on spread spectrum carrier",

abstract = "Power Line Carrier (PLC) communication presents an appealing and economical solution for many monitoring systems. SSC (Spread Spectrum Carrier) technology can spread the transmitting bandwidth of the signal so widely that it has attractive features of better anti-interference capability and higher reliability, so it is more suitable for unfriendly low-voltage PLC application than other modulation methods. Firstly, this paper gives a brief introduction of a street lamp monitoring and communicating system; secondly, it describes the structure of the node controller and discusses some key problems such as carrier frequency, wave trap coil and software to improve the performance of low-voltage PLC communication; finally, the experimental result is listed which looks promising for deeper research and application.",

keywords = "Ballast, Power line carrier communication, Spread spectrum carrier, Wave trap coil",

author = "Yuying Yao and Donglai Zhang and Chao Wang and Yong Sun and Dianguo Xu",

year = "2006",

doi = "10.1109/ISIE.2006.295992",

language = "英语",

isbn = "1424404975",

series = "IEEE International Symposium on Industrial Electronics",

pages = "1642--1645",

booktitle = "International Symposium on Industrial Electronics 2006, ISIE 2006",

note = "International Symposium on Industrial Electronics 2006, ISIE 2006 ; Conference date: 09-07-2006 Through 13-07-2006",

}

Yao, Y, Zhang, D, Wang, C, Sun, Y & Xu, D 2006, Design of remote street lamp monitoring and communicating node controller based on spread spectrum carrier. in International Symposium on Industrial Electronics 2006, ISIE 2006., 4078490, IEEE International Symposium on Industrial Electronics, vol. 3, pp. 1642-1645, International Symposium on Industrial Electronics 2006, ISIE 2006, Montreal, QC, Canada, 9/07/06. https://doi.org/10.1109/ISIE.2006.295992

Design of remote street lamp monitoring and communicating node controller based on spread spectrum carrier. / Yao, Yuying; Zhang, Donglai; Wang, Chao et al.
International Symposium on Industrial Electronics 2006, ISIE 2006. 2006. p. 1642-1645 4078490 (IEEE International Symposium on Industrial Electronics; Vol. 3).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - Design of remote street lamp monitoring and communicating node controller based on spread spectrum carrier

AU - Yao, Yuying

AU - Zhang, Donglai

AU - Wang, Chao

AU - Sun, Yong

AU - Xu, Dianguo

PY - 2006

Y1 - 2006

N2 - Power Line Carrier (PLC) communication presents an appealing and economical solution for many monitoring systems. SSC (Spread Spectrum Carrier) technology can spread the transmitting bandwidth of the signal so widely that it has attractive features of better anti-interference capability and higher reliability, so it is more suitable for unfriendly low-voltage PLC application than other modulation methods. Firstly, this paper gives a brief introduction of a street lamp monitoring and communicating system; secondly, it describes the structure of the node controller and discusses some key problems such as carrier frequency, wave trap coil and software to improve the performance of low-voltage PLC communication; finally, the experimental result is listed which looks promising for deeper research and application.

AB - Power Line Carrier (PLC) communication presents an appealing and economical solution for many monitoring systems. SSC (Spread Spectrum Carrier) technology can spread the transmitting bandwidth of the signal so widely that it has attractive features of better anti-interference capability and higher reliability, so it is more suitable for unfriendly low-voltage PLC application than other modulation methods. Firstly, this paper gives a brief introduction of a street lamp monitoring and communicating system; secondly, it describes the structure of the node controller and discusses some key problems such as carrier frequency, wave trap coil and software to improve the performance of low-voltage PLC communication; finally, the experimental result is listed which looks promising for deeper research and application.

KW - Ballast

KW - Power line carrier communication

KW - Spread spectrum carrier

KW - Wave trap coil

UR - https://www.scopus.com/pages/publications/53849098034

U2 - 10.1109/ISIE.2006.295992

DO - 10.1109/ISIE.2006.295992

M3 - 会议稿件

AN - SCOPUS:53849098034

SN - 1424404975

SN - 9781424404971

T3 - IEEE International Symposium on Industrial Electronics

SP - 1642

EP - 1645

BT - International Symposium on Industrial Electronics 2006, ISIE 2006

T2 - International Symposium on Industrial Electronics 2006, ISIE 2006

Y2 - 9 July 2006 through 13 July 2006

ER -

Design of remote street lamp monitoring and communicating node controller based on spread spectrum carrier

Abstract

Publication series

Conference

Keywords

Access to Document

Other files and links

Fingerprint

Cite this