Skip to main navigation Skip to search Skip to main content

Design of multipass cell with dense spot patterns and its performance in a light-induced thermoelastic spectroscopy-based methane sensor

  • Harbin Institute of Technology

Research output: Contribution to journalArticlepeer-review

Abstract

In this study, a ray tracing model based on the law of reflection in vector form was developed to obtain the design parameters of multipass cells (MPC) with dense spot patterns. Four MPCs with distinct patterns were obtained using an established mathematical model. An MPC with a four-concentric-circle pattern exhibited the longest optical path length (OPL) of approximately 38 m and an optimal ratio of optical path length to volume (RLV) of 13.8 cm-2. A light-induced thermoelastic spectroscopy (LITES)-based methane (CH4) sensor was constructed for the first time using the developed optimal MPC and Raman fiber amplifier (RFA). A novel trapezoidal-tip quartz tuning fork (QTF) was used as the detector to further improve the sensing performance. The CH4-LITES sensor exhibited an excellent linear response to optical power and CH4 concentration. The minimum detection limit (MDL) of the CH4-LITES sensor reached 322 ppb when the output optical power of the RFA was 350 mW. The Allan deviation of the system indicated that the MDL decreased to 59.5 ppb when the average time was increased to 100 s.

Original languageEnglish
Article number1
JournalLight: Advanced Manufacturing
Volume6
Issue number1
DOIs
StatePublished - 2025

Keywords

  • Gas sensing
  • Light-induced thermoelastic spectroscopy
  • Multipass cell
  • Raman fiber amplifier

Fingerprint

Dive into the research topics of 'Design of multipass cell with dense spot patterns and its performance in a light-induced thermoelastic spectroscopy-based methane sensor'. Together they form a unique fingerprint.

Cite this