Design for torsional transducer in ultrasonic machining based on equivalent circuit

Zhili Long; Yuecai Liu; Zengying Zhang; Sheng Liu; Jianjun Zhou

doi:10.1109/ICInfA.2017.8079040

Design for torsional transducer in ultrasonic machining based on equivalent circuit

Zhili Long
, Yuecai Liu
, Zengying Zhang
, Sheng Liu
, Jianjun Zhou

Harbin Institute of Technology Shenzhen
Supersonic Precision Ltd.
Dongguan University of Technology

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

2 Scopus citations

Abstract

A design method for ultrasonic torsional transducer is presented based on the one-dimensional wave equation and the equivalent circuit method. Firstly, the equivalent circuits of torsional transducer and horn are constructed. The mounting flange can be placed right at the nodal plane, where no angular displacement occurs. An ultrasonic torsional tool is fabricated according to the presented method, and the resonance frequency and torsional vibration amplitude are measured by Laser. The comparison between the measured and predicted results shows that the present method is reliable, simple and straight.

Original language	English
Title of host publication	2017 IEEE International Conference on Information and Automation, ICIA 2017
Publisher	Institute of Electrical and Electronics Engineers Inc.
Pages	953-958
Number of pages	6
ISBN (Electronic)	9781538631546
DOIs	https://doi.org/10.1109/ICInfA.2017.8079040
State	Published - 20 Oct 2017
Externally published	Yes
Event	2017 IEEE International Conference on Information and Automation, ICIA 2017 - Macau, China Duration: 18 Jul 2017 → 20 Jul 2017

Publication series

Name	2017 IEEE International Conference on Information and Automation, ICIA 2017

Conference

Conference	2017 IEEE International Conference on Information and Automation, ICIA 2017
Country/Territory	China
City	Macau
Period	18/07/17 → 20/07/17

Keywords

Equivalent Circuit
Torsional Transducer
Ultrasonic Machining

Access to Document

10.1109/ICInfA.2017.8079040

Cite this

Long, Z., Liu, Y., Zhang, Z., Liu, S., & Zhou, J. (2017). Design for torsional transducer in ultrasonic machining based on equivalent circuit. In 2017 IEEE International Conference on Information and Automation, ICIA 2017 (pp. 953-958). Article 8079040 (2017 IEEE International Conference on Information and Automation, ICIA 2017). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/ICInfA.2017.8079040

@inproceedings{d96c6690abf6478b83302148633f7674,

title = "Design for torsional transducer in ultrasonic machining based on equivalent circuit",

abstract = "A design method for ultrasonic torsional transducer is presented based on the one-dimensional wave equation and the equivalent circuit method. Firstly, the equivalent circuits of torsional transducer and horn are constructed. The mounting flange can be placed right at the nodal plane, where no angular displacement occurs. An ultrasonic torsional tool is fabricated according to the presented method, and the resonance frequency and torsional vibration amplitude are measured by Laser. The comparison between the measured and predicted results shows that the present method is reliable, simple and straight.",

keywords = "Equivalent Circuit, Torsional Transducer, Ultrasonic Machining",

author = "Zhili Long and Yuecai Liu and Zengying Zhang and Sheng Liu and Jianjun Zhou",

note = "Publisher Copyright: {\textcopyright} 2017 IEEE.; 2017 IEEE International Conference on Information and Automation, ICIA 2017 ; Conference date: 18-07-2017 Through 20-07-2017",

year = "2017",

month = oct,

day = "20",

doi = "10.1109/ICInfA.2017.8079040",

language = "英语",

series = "2017 IEEE International Conference on Information and Automation, ICIA 2017",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

pages = "953--958",

booktitle = "2017 IEEE International Conference on Information and Automation, ICIA 2017",

address = "美国",

}

Long, Z, Liu, Y, Zhang, Z, Liu, S & Zhou, J 2017, Design for torsional transducer in ultrasonic machining based on equivalent circuit. in 2017 IEEE International Conference on Information and Automation, ICIA 2017., 8079040, 2017 IEEE International Conference on Information and Automation, ICIA 2017, Institute of Electrical and Electronics Engineers Inc., pp. 953-958, 2017 IEEE International Conference on Information and Automation, ICIA 2017, Macau, China, 18/07/17. https://doi.org/10.1109/ICInfA.2017.8079040

Design for torsional transducer in ultrasonic machining based on equivalent circuit. / Long, Zhili; Liu, Yuecai; Zhang, Zengying et al.
2017 IEEE International Conference on Information and Automation, ICIA 2017. Institute of Electrical and Electronics Engineers Inc., 2017. p. 953-958 8079040 (2017 IEEE International Conference on Information and Automation, ICIA 2017).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - Design for torsional transducer in ultrasonic machining based on equivalent circuit

AU - Long, Zhili

AU - Liu, Yuecai

AU - Zhang, Zengying

AU - Liu, Sheng

AU - Zhou, Jianjun

PY - 2017/10/20

Y1 - 2017/10/20

N2 - A design method for ultrasonic torsional transducer is presented based on the one-dimensional wave equation and the equivalent circuit method. Firstly, the equivalent circuits of torsional transducer and horn are constructed. The mounting flange can be placed right at the nodal plane, where no angular displacement occurs. An ultrasonic torsional tool is fabricated according to the presented method, and the resonance frequency and torsional vibration amplitude are measured by Laser. The comparison between the measured and predicted results shows that the present method is reliable, simple and straight.

AB - A design method for ultrasonic torsional transducer is presented based on the one-dimensional wave equation and the equivalent circuit method. Firstly, the equivalent circuits of torsional transducer and horn are constructed. The mounting flange can be placed right at the nodal plane, where no angular displacement occurs. An ultrasonic torsional tool is fabricated according to the presented method, and the resonance frequency and torsional vibration amplitude are measured by Laser. The comparison between the measured and predicted results shows that the present method is reliable, simple and straight.

KW - Equivalent Circuit

KW - Torsional Transducer

KW - Ultrasonic Machining

UR - https://www.scopus.com/pages/publications/85039960884

U2 - 10.1109/ICInfA.2017.8079040

DO - 10.1109/ICInfA.2017.8079040

M3 - 会议稿件

AN - SCOPUS:85039960884

T3 - 2017 IEEE International Conference on Information and Automation, ICIA 2017

SP - 953

EP - 958

BT - 2017 IEEE International Conference on Information and Automation, ICIA 2017

PB - Institute of Electrical and Electronics Engineers Inc.

T2 - 2017 IEEE International Conference on Information and Automation, ICIA 2017

Y2 - 18 July 2017 through 20 July 2017

ER -

Long Z, Liu Y, Zhang Z, Liu S, Zhou J. Design for torsional transducer in ultrasonic machining based on equivalent circuit. In 2017 IEEE International Conference on Information and Automation, ICIA 2017. Institute of Electrical and Electronics Engineers Inc. 2017. p. 953-958. 8079040. (2017 IEEE International Conference on Information and Automation, ICIA 2017). doi: 10.1109/ICInfA.2017.8079040

Design for torsional transducer in ultrasonic machining based on equivalent circuit

Abstract

Publication series

Conference

Keywords

Access to Document

Other files and links

Fingerprint

Cite this