Design and experiment of an electromagnetic ocean wave energy harvesting device

Qiyu Guo; Ming Sun; Huicong Liu; Xin Ma; Zhaohui Chen; Tao Chen; Lining Sun

doi:10.1109/AIM.2018.8452264

Design and experiment of an electromagnetic ocean wave energy harvesting device

Qiyu Guo
, Ming Sun
, Huicong Liu
, Xin Ma
, Zhaohui Chen
, Tao Chen
, Lining Sun

Soochow University
Ocean University of China

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

13 Scopus citations

Abstract

In this paper, we developed an electromagnetic ocean wave energy harvesting device. It consists of a rack, a swing body, transmission gears and electromagnetic power module. The swing body can convert the low-frequency wave energy to mechanical rotation energy, and the transmission gears amplify the low rotating speed of swing body. The electromagnetic power module is used to convert rotating mechanical energy into electricity. On the basis of the flume experiment, this device is expected to produce a maximum output power of 122 mW under wind speed of 20 m/s and its output power density can reach to 0.24 mW/cm³. Therefore, this device can power the small components of the equipment and extend the life cycle. Apart from this, the device is small and can be integrated into the marine monitoring equipment.

Original language	English
Title of host publication	AIM 2018 - IEEE/ASME International Conference on Advanced Intelligent Mechatronics
Publisher	Institute of Electrical and Electronics Engineers Inc.
Pages	381-384
Number of pages	4
ISBN (Print)	9781538618547
DOIs	https://doi.org/10.1109/AIM.2018.8452264
State	Published - 30 Aug 2018
Externally published	Yes
Event	2018 IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM 2018 - Auckland, New Zealand Duration: 9 Jul 2018 → 12 Jul 2018

Publication series

Name	IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM
Volume	2018-July

Conference

Conference	2018 IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM 2018
Country/Territory	New Zealand
City	Auckland
Period	9/07/18 → 12/07/18

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

SDG 14 Life Below Water

Access to Document

10.1109/AIM.2018.8452264

Cite this

Guo, Q., Sun, M., Liu, H., Ma, X., Chen, Z., Chen, T., & Sun, L. (2018). Design and experiment of an electromagnetic ocean wave energy harvesting device. In AIM 2018 - IEEE/ASME International Conference on Advanced Intelligent Mechatronics (pp. 381-384). Article 8452264 (IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM; Vol. 2018-July). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/AIM.2018.8452264

@inproceedings{93f6130afba44dcd942dd1cf65420f6e,

title = "Design and experiment of an electromagnetic ocean wave energy harvesting device",

abstract = "In this paper, we developed an electromagnetic ocean wave energy harvesting device. It consists of a rack, a swing body, transmission gears and electromagnetic power module. The swing body can convert the low-frequency wave energy to mechanical rotation energy, and the transmission gears amplify the low rotating speed of swing body. The electromagnetic power module is used to convert rotating mechanical energy into electricity. On the basis of the flume experiment, this device is expected to produce a maximum output power of 122 mW under wind speed of 20 m/s and its output power density can reach to 0.24 mW/cm3. Therefore, this device can power the small components of the equipment and extend the life cycle. Apart from this, the device is small and can be integrated into the marine monitoring equipment.",

author = "Qiyu Guo and Ming Sun and Huicong Liu and Xin Ma and Zhaohui Chen and Tao Chen and Lining Sun",

note = "Publisher Copyright: {\textcopyright} 2018 IEEE.; 2018 IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM 2018 ; Conference date: 09-07-2018 Through 12-07-2018",

year = "2018",

month = aug,

day = "30",

doi = "10.1109/AIM.2018.8452264",

language = "英语",

isbn = "9781538618547",

series = "IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

pages = "381--384",

booktitle = "AIM 2018 - IEEE/ASME International Conference on Advanced Intelligent Mechatronics",

address = "美国",

}

Guo, Q, Sun, M, Liu, H, Ma, X, Chen, Z, Chen, T & Sun, L 2018, Design and experiment of an electromagnetic ocean wave energy harvesting device. in AIM 2018 - IEEE/ASME International Conference on Advanced Intelligent Mechatronics., 8452264, IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM, vol. 2018-July, Institute of Electrical and Electronics Engineers Inc., pp. 381-384, 2018 IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM 2018, Auckland, New Zealand, 9/07/18. https://doi.org/10.1109/AIM.2018.8452264

Design and experiment of an electromagnetic ocean wave energy harvesting device. / Guo, Qiyu; Sun, Ming; Liu, Huicong et al.
AIM 2018 - IEEE/ASME International Conference on Advanced Intelligent Mechatronics. Institute of Electrical and Electronics Engineers Inc., 2018. p. 381-384 8452264 (IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM; Vol. 2018-July).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - Design and experiment of an electromagnetic ocean wave energy harvesting device

AU - Guo, Qiyu

AU - Sun, Ming

AU - Liu, Huicong

AU - Ma, Xin

AU - Chen, Zhaohui

AU - Chen, Tao

AU - Sun, Lining

PY - 2018/8/30

Y1 - 2018/8/30

N2 - In this paper, we developed an electromagnetic ocean wave energy harvesting device. It consists of a rack, a swing body, transmission gears and electromagnetic power module. The swing body can convert the low-frequency wave energy to mechanical rotation energy, and the transmission gears amplify the low rotating speed of swing body. The electromagnetic power module is used to convert rotating mechanical energy into electricity. On the basis of the flume experiment, this device is expected to produce a maximum output power of 122 mW under wind speed of 20 m/s and its output power density can reach to 0.24 mW/cm3. Therefore, this device can power the small components of the equipment and extend the life cycle. Apart from this, the device is small and can be integrated into the marine monitoring equipment.

AB - In this paper, we developed an electromagnetic ocean wave energy harvesting device. It consists of a rack, a swing body, transmission gears and electromagnetic power module. The swing body can convert the low-frequency wave energy to mechanical rotation energy, and the transmission gears amplify the low rotating speed of swing body. The electromagnetic power module is used to convert rotating mechanical energy into electricity. On the basis of the flume experiment, this device is expected to produce a maximum output power of 122 mW under wind speed of 20 m/s and its output power density can reach to 0.24 mW/cm3. Therefore, this device can power the small components of the equipment and extend the life cycle. Apart from this, the device is small and can be integrated into the marine monitoring equipment.

UR - https://www.scopus.com/pages/publications/85053904935

U2 - 10.1109/AIM.2018.8452264

DO - 10.1109/AIM.2018.8452264

M3 - 会议稿件

AN - SCOPUS:85053904935

SN - 9781538618547

T3 - IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM

SP - 381

EP - 384

BT - AIM 2018 - IEEE/ASME International Conference on Advanced Intelligent Mechatronics

PB - Institute of Electrical and Electronics Engineers Inc.

T2 - 2018 IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM 2018

Y2 - 9 July 2018 through 12 July 2018

ER -

Guo Q, Sun M, Liu H, Ma X, Chen Z, Chen T et al. Design and experiment of an electromagnetic ocean wave energy harvesting device. In AIM 2018 - IEEE/ASME International Conference on Advanced Intelligent Mechatronics. Institute of Electrical and Electronics Engineers Inc. 2018. p. 381-384. 8452264. (IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM). doi: 10.1109/AIM.2018.8452264

Design and experiment of an electromagnetic ocean wave energy harvesting device

Abstract

Publication series

Conference

UN SDGs

Access to Document

Other files and links

Fingerprint

Cite this