Densification of uniformly small-grained BaTiO3 using spark-plasma-sintering

Baorang Li; Xiaohui Wang; Minmin Cai; Lifeng Hao; Longtu Li

doi:10.1016/S0254-0584(03)00195-0

Densification of uniformly small-grained BaTiO₃ using spark-plasma-sintering

Baorang Li^*
, Xiaohui Wang
, Minmin Cai
, Lifeng Hao
, Longtu Li

^*Corresponding author for this work

Tsinghua University

Research output: Contribution to journal › Article › peer-review

47 Scopus citations

Abstract

This paper reports results of an investigation aiming at finding what affects the microstructure and density of barium titanate (BaTiO₃) by spark-plasma-sintering (SPS) process. Nano-sized BaTiO₃ powders were prepared by different chemical methods and then sintered under different SPS conditions such as synthesis methods, heating rate, holding time and sintering temperature, etc. The possible effects of these factors upon the densities and grain size have been analyzed in details. The results show that dense BaTiO₃ with grain size of less than 100nm can be obtained by controlling the conditions during SPS process.

Original language	English
Pages (from-to)	173-180
Number of pages	8
Journal	Materials Chemistry and Physics
Volume	82
Issue number	1
DOIs	https://doi.org/10.1016/S0254-0584(03)00195-0
State	Published - 28 Sep 2003
Externally published	Yes

Keywords

Heating rate
Holding time
Nano-BaTiO powder
Sintering temperature
Synthesis method

Access to Document

10.1016/S0254-0584(03)00195-0

Cite this

@article{8691985b6e5640a8b5d60a04d0b4ba04,

title = "Densification of uniformly small-grained BaTiO3 using spark-plasma-sintering",

abstract = "This paper reports results of an investigation aiming at finding what affects the microstructure and density of barium titanate (BaTiO3) by spark-plasma-sintering (SPS) process. Nano-sized BaTiO3 powders were prepared by different chemical methods and then sintered under different SPS conditions such as synthesis methods, heating rate, holding time and sintering temperature, etc. The possible effects of these factors upon the densities and grain size have been analyzed in details. The results show that dense BaTiO3 with grain size of less than 100nm can be obtained by controlling the conditions during SPS process.",

keywords = "Heating rate, Holding time, Nano-BaTiO powder, Sintering temperature, Synthesis method",

author = "Baorang Li and Xiaohui Wang and Minmin Cai and Lifeng Hao and Longtu Li",

year = "2003",

month = sep,

day = "28",

doi = "10.1016/S0254-0584(03)00195-0",

language = "英语",

volume = "82",

pages = "173--180",

journal = "Materials Chemistry and Physics",

issn = "0254-0584",

publisher = "Elsevier B.V.",

number = "1",

}

TY - JOUR

T1 - Densification of uniformly small-grained BaTiO3 using spark-plasma-sintering

AU - Li, Baorang

AU - Wang, Xiaohui

AU - Cai, Minmin

AU - Hao, Lifeng

AU - Li, Longtu

PY - 2003/9/28

Y1 - 2003/9/28

N2 - This paper reports results of an investigation aiming at finding what affects the microstructure and density of barium titanate (BaTiO3) by spark-plasma-sintering (SPS) process. Nano-sized BaTiO3 powders were prepared by different chemical methods and then sintered under different SPS conditions such as synthesis methods, heating rate, holding time and sintering temperature, etc. The possible effects of these factors upon the densities and grain size have been analyzed in details. The results show that dense BaTiO3 with grain size of less than 100nm can be obtained by controlling the conditions during SPS process.

AB - This paper reports results of an investigation aiming at finding what affects the microstructure and density of barium titanate (BaTiO3) by spark-plasma-sintering (SPS) process. Nano-sized BaTiO3 powders were prepared by different chemical methods and then sintered under different SPS conditions such as synthesis methods, heating rate, holding time and sintering temperature, etc. The possible effects of these factors upon the densities and grain size have been analyzed in details. The results show that dense BaTiO3 with grain size of less than 100nm can be obtained by controlling the conditions during SPS process.

KW - Heating rate

KW - Holding time

KW - Nano-BaTiO powder

KW - Sintering temperature

KW - Synthesis method

UR - https://www.scopus.com/pages/publications/0042131608

U2 - 10.1016/S0254-0584(03)00195-0

DO - 10.1016/S0254-0584(03)00195-0

M3 - 文章

AN - SCOPUS:0042131608

SN - 0254-0584

VL - 82

SP - 173

EP - 180

JO - Materials Chemistry and Physics

JF - Materials Chemistry and Physics

IS - 1

ER -

Densification of uniformly small-grained BaTiO₃ using spark-plasma-sintering

Abstract

Keywords

Access to Document

Other files and links

Fingerprint

Cite this