Cross-sectional oxide distribution of cast IN738 and its sputtered coating at 1000 °C

Shujiang Geng; Fuhui Wang; Sam Zhang

doi:10.1016/S0257-8972(02)00909-X

Cross-sectional oxide distribution of cast IN738 and its sputtered coating at 1000 °C

Shujiang Geng^*
, Fuhui Wang
, Sam Zhang

^*Corresponding author for this work

Nanyang Technological University
CAS - Institute of Metal Research

Research output: Contribution to journal › Article › peer-review

21 Scopus citations

Abstract

A sputtered nanocrystalline coating of IN738 alloy was obtained by means of magnetron sputtering technique. The oxide distribution was presented of the cast IN738 and its coating after 50 h in air at 1000 °C. The results indicated that the oxide scale formed on the cast alloy consisted roughly of three sections: The top-most section being Cr₂ O₃ and TiO₂ mixture, followed by internal aluminum oxide, and scattering beneath which being TiN particles. In the case of nanocrystalline coating, however, only two sections were obvious: The top Cr₂ O₃, TiO₂ and NiCr₂ O₄ spinel mixture layer and the inner continuous Al₂ O₃ layer. No internal oxidation and nitridation occurred.

Original language	English
Pages (from-to)	161-164
Number of pages	4
Journal	Surface and Coatings Technology
Volume	167
Issue number	2-3
DOIs	https://doi.org/10.1016/S0257-8972(02)00909-X
State	Published - 22 Apr 2003
Externally published	Yes

Keywords

IN738 alloy
Nanocrystalline coating
Oxidation
Sputtering

Access to Document

10.1016/S0257-8972(02)00909-X

Cite this

@article{ac0b99b3b9b84031b5617b0dd78e1433,

title = "Cross-sectional oxide distribution of cast IN738 and its sputtered coating at 1000 °C",

abstract = "A sputtered nanocrystalline coating of IN738 alloy was obtained by means of magnetron sputtering technique. The oxide distribution was presented of the cast IN738 and its coating after 50 h in air at 1000 °C. The results indicated that the oxide scale formed on the cast alloy consisted roughly of three sections: The top-most section being Cr2 O3 and TiO2 mixture, followed by internal aluminum oxide, and scattering beneath which being TiN particles. In the case of nanocrystalline coating, however, only two sections were obvious: The top Cr2 O3, TiO2 and NiCr2 O4 spinel mixture layer and the inner continuous Al2 O3 layer. No internal oxidation and nitridation occurred.",

keywords = "IN738 alloy, Nanocrystalline coating, Oxidation, Sputtering",

author = "Shujiang Geng and Fuhui Wang and Sam Zhang",

year = "2003",

month = apr,

day = "22",

doi = "10.1016/S0257-8972(02)00909-X",

language = "英语",

volume = "167",

pages = "161--164",

journal = "Surface and Coatings Technology",

issn = "0257-8972",

publisher = "Elsevier B.V.",

number = "2-3",

}

TY - JOUR

T1 - Cross-sectional oxide distribution of cast IN738 and its sputtered coating at 1000 °C

AU - Geng, Shujiang

AU - Wang, Fuhui

AU - Zhang, Sam

PY - 2003/4/22

Y1 - 2003/4/22

N2 - A sputtered nanocrystalline coating of IN738 alloy was obtained by means of magnetron sputtering technique. The oxide distribution was presented of the cast IN738 and its coating after 50 h in air at 1000 °C. The results indicated that the oxide scale formed on the cast alloy consisted roughly of three sections: The top-most section being Cr2 O3 and TiO2 mixture, followed by internal aluminum oxide, and scattering beneath which being TiN particles. In the case of nanocrystalline coating, however, only two sections were obvious: The top Cr2 O3, TiO2 and NiCr2 O4 spinel mixture layer and the inner continuous Al2 O3 layer. No internal oxidation and nitridation occurred.

AB - A sputtered nanocrystalline coating of IN738 alloy was obtained by means of magnetron sputtering technique. The oxide distribution was presented of the cast IN738 and its coating after 50 h in air at 1000 °C. The results indicated that the oxide scale formed on the cast alloy consisted roughly of three sections: The top-most section being Cr2 O3 and TiO2 mixture, followed by internal aluminum oxide, and scattering beneath which being TiN particles. In the case of nanocrystalline coating, however, only two sections were obvious: The top Cr2 O3, TiO2 and NiCr2 O4 spinel mixture layer and the inner continuous Al2 O3 layer. No internal oxidation and nitridation occurred.

KW - IN738 alloy

KW - Nanocrystalline coating

KW - Oxidation

KW - Sputtering

UR - https://www.scopus.com/pages/publications/0037461179

U2 - 10.1016/S0257-8972(02)00909-X

DO - 10.1016/S0257-8972(02)00909-X

M3 - 文章

AN - SCOPUS:0037461179

SN - 0257-8972

VL - 167

SP - 161

EP - 164

JO - Surface and Coatings Technology

JF - Surface and Coatings Technology

IS - 2-3

ER -

Cross-sectional oxide distribution of cast IN738 and its sputtered coating at 1000 °C

Abstract

Keywords

Access to Document

Other files and links

Fingerprint

Cite this