Combined bending-torsion and compression-bending-torsion behaviours of reinforced concrete-filled thin-walled corrugated steel tubes

Reinforced concrete-filled thin-walled galvanized corrugated steel tube (RCFCST) is a novel composite member that has application potential in extremely corrosive environments and seismic activity regions. A series of preliminary works have been conducted on its compressive, flexural, shear, and torsional behaviour. However, the combined loading condition is almost inevitable in practice. The correlations between the flexural and torsional behaviour of RCFCSTs are unique due to the special spiral corrugated profile, which is unclear and needs to be addressed. This paper, therefore, presents an experimental investigation of the RCFCST under combined bending-torsion and compression-bending-torsion loads, encompassing the main test variables of torsion-to-bending ratios, torsional directions, and axial compression ratios. The loading set-up and instruments have been introduced in detail. The failure modes, lateral load versus lateral displacement curves, bending moment versus flexural lateral displacement curves, torsion moment versus torsional angle curves, and strain distributions are carefully addressed. The working mechanisms of the RCFCST under monotonic combined loads are discussed, with a particular explanation of the dependent behaviour on the torsion-to-bending ratios and torsional directions. The applicability of the existing design methods for the bearing capacity of RCFCST specimens under combined loads is examined carefully, with specific design suggestions proposed.