Assembly of Pt nanoparticles on electrospun In2O3 nanofibers for H2S detection

Wei Zheng; Xiaofeng Lu; Wei Wang; Zhenyu Li; Hongnan Zhang; Zhaojie Wang; Xiuru Xu; Shangyu Li; Ce Wang

doi:10.1016/j.jcis.2009.06.041

Assembly of Pt nanoparticles on electrospun In₂O₃ nanofibers for H₂S detection

Wei Zheng
, Xiaofeng Lu
, Wei Wang
, Zhenyu Li
, Hongnan Zhang
, Zhaojie Wang
, Xiuru Xu
, Shangyu Li
, Ce Wang^*

^*Corresponding author for this work

Jilin University

Research output: Contribution to journal › Article › peer-review

89 Scopus citations

Abstract

In this paper, we presented a simple and effective solution route to deposit Pt nanoparticles on electrospun In₂O₃ nanofibers for H₂S gas detection. The morphology and chemical structure of the as-prepared samples were analyzed by scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), and X-ray photoelectron spectra (XPS). The results showed that large quantities of In₂O₃ nanofibers with diameters about from 60 to 100 nm were obtained and the surface of them was decorated with Pt nanoparticles (5-10 nm in size). The In₂O₃ nanofibers decorated by Pt nanoparticles exhibited excellent gas sensing properties to H₂S, such as high sensitivity, good selectivity and fast response at relatively low temperature.

Original language	English
Pages (from-to)	366-370
Number of pages	5
Journal	Journal of Colloid and Interface Science
Volume	338
Issue number	2
DOIs	https://doi.org/10.1016/j.jcis.2009.06.041
State	Published - 15 Oct 2009
Externally published	Yes

Keywords

Electrospinning
Hydrogen sulfide
Indium oxide
Nanofibers
Nanoparticles
Sensor

Access to Document

10.1016/j.jcis.2009.06.041

Cite this

@article{02adf65b23404433b35043bd9b8b9ac0,

title = "Assembly of Pt nanoparticles on electrospun In2O3 nanofibers for H2S detection",

abstract = "In this paper, we presented a simple and effective solution route to deposit Pt nanoparticles on electrospun In2O3 nanofibers for H2S gas detection. The morphology and chemical structure of the as-prepared samples were analyzed by scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), and X-ray photoelectron spectra (XPS). The results showed that large quantities of In2O3 nanofibers with diameters about from 60 to 100 nm were obtained and the surface of them was decorated with Pt nanoparticles (5-10 nm in size). The In2O3 nanofibers decorated by Pt nanoparticles exhibited excellent gas sensing properties to H2S, such as high sensitivity, good selectivity and fast response at relatively low temperature.",

keywords = "Electrospinning, Hydrogen sulfide, Indium oxide, Nanofibers, Nanoparticles, Sensor",

author = "Wei Zheng and Xiaofeng Lu and Wei Wang and Zhenyu Li and Hongnan Zhang and Zhaojie Wang and Xiuru Xu and Shangyu Li and Ce Wang",

year = "2009",

month = oct,

day = "15",

doi = "10.1016/j.jcis.2009.06.041",

language = "英语",

volume = "338",

pages = "366--370",

journal = "Journal of Colloid and Interface Science",

issn = "0021-9797",

publisher = "Academic Press Inc.",

number = "2",

}

TY - JOUR

T1 - Assembly of Pt nanoparticles on electrospun In2O3 nanofibers for H2S detection

AU - Zheng, Wei

AU - Lu, Xiaofeng

AU - Wang, Wei

AU - Li, Zhenyu

AU - Zhang, Hongnan

AU - Wang, Zhaojie

AU - Xu, Xiuru

AU - Li, Shangyu

AU - Wang, Ce

PY - 2009/10/15

Y1 - 2009/10/15

N2 - In this paper, we presented a simple and effective solution route to deposit Pt nanoparticles on electrospun In2O3 nanofibers for H2S gas detection. The morphology and chemical structure of the as-prepared samples were analyzed by scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), and X-ray photoelectron spectra (XPS). The results showed that large quantities of In2O3 nanofibers with diameters about from 60 to 100 nm were obtained and the surface of them was decorated with Pt nanoparticles (5-10 nm in size). The In2O3 nanofibers decorated by Pt nanoparticles exhibited excellent gas sensing properties to H2S, such as high sensitivity, good selectivity and fast response at relatively low temperature.

AB - In this paper, we presented a simple and effective solution route to deposit Pt nanoparticles on electrospun In2O3 nanofibers for H2S gas detection. The morphology and chemical structure of the as-prepared samples were analyzed by scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), and X-ray photoelectron spectra (XPS). The results showed that large quantities of In2O3 nanofibers with diameters about from 60 to 100 nm were obtained and the surface of them was decorated with Pt nanoparticles (5-10 nm in size). The In2O3 nanofibers decorated by Pt nanoparticles exhibited excellent gas sensing properties to H2S, such as high sensitivity, good selectivity and fast response at relatively low temperature.

KW - Electrospinning

KW - Hydrogen sulfide

KW - Indium oxide

KW - Nanofibers

KW - Nanoparticles

KW - Sensor

UR - https://www.scopus.com/pages/publications/68949173917

U2 - 10.1016/j.jcis.2009.06.041

DO - 10.1016/j.jcis.2009.06.041

M3 - 文章

C2 - 19619881

AN - SCOPUS:68949173917

SN - 0021-9797

VL - 338

SP - 366

EP - 370

JO - Journal of Colloid and Interface Science

JF - Journal of Colloid and Interface Science

IS - 2

ER -

Assembly of Pt nanoparticles on electrospun In₂O₃ nanofibers for H₂S detection

Abstract

Keywords

Access to Document

Other files and links

Fingerprint

Cite this