Analysis and simulation method of the cantilever FBG sensors

Kunpeng Feng; Jiwen Cui; Xuelin Jiang; Junying Li; Jiubin Tan

doi:10.1117/12.2211919

Analysis and simulation method of the cantilever FBG sensors

Kunpeng Feng
, Jiwen Cui
, Xuelin Jiang
, Junying Li
, Jiubin Tan

School of Instrumentation Science and Engineering

Harbin Institute of Technology

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

3 Scopus citations

Abstract

To enrich the sensing mechanism of the FBG sensors, the cantilever FBG sensor is taken as an example to analyze the effect of the deflection on the embedded stress distribution and structure parameters of the FBG, and a widely applicable analysis method is thus proposed. Models of the single-core and multi-core FBG sensor are built by the proposed method and a modified transmission matrix method is utilized to simulate the built models. The lateral resolution of the multicore FBG sensor is proved to be 1500 times higher than the single-core FBG sensor. Simulation results of the proposed models indicate that this approach is tally with the experiment of other researches, and it can be used to analyze the performance of the designed sensors, such as spectrum signal and resolution, or as a guide of designing FBG sensors.

Original language	English
Title of host publication	Seventh International Symposium on Precision Mechanical Measurements
Editors	Liandong Yu
Publisher	SPIE
ISBN (Electronic)	9781510601673
DOIs	https://doi.org/10.1117/12.2211919
State	Published - 2016
Event	7th International Symposium on Precision Mechanical Measurements, ISPMM 2015 - Xia'men, China Duration: 8 Aug 2015 → 12 Aug 2015

Publication series

Name	Proceedings of SPIE - The International Society for Optical Engineering
Volume	9903
ISSN (Print)	0277-786X
ISSN (Electronic)	1996-756X

Conference

Conference	7th International Symposium on Precision Mechanical Measurements, ISPMM 2015
Country/Territory	China
City	Xia'men
Period	8/08/15 → 12/08/15

Access to Document

10.1117/12.2211919

Cite this

@inproceedings{0dcb5b361651432aab0afb8e4595893a,

title = "Analysis and simulation method of the cantilever FBG sensors",

abstract = "To enrich the sensing mechanism of the FBG sensors, the cantilever FBG sensor is taken as an example to analyze the effect of the deflection on the embedded stress distribution and structure parameters of the FBG, and a widely applicable analysis method is thus proposed. Models of the single-core and multi-core FBG sensor are built by the proposed method and a modified transmission matrix method is utilized to simulate the built models. The lateral resolution of the multicore FBG sensor is proved to be 1500 times higher than the single-core FBG sensor. Simulation results of the proposed models indicate that this approach is tally with the experiment of other researches, and it can be used to analyze the performance of the designed sensors, such as spectrum signal and resolution, or as a guide of designing FBG sensors.",

author = "Kunpeng Feng and Jiwen Cui and Xuelin Jiang and Junying Li and Jiubin Tan",

note = "Publisher Copyright: {\textcopyright} 2016 SPIE.; 7th International Symposium on Precision Mechanical Measurements, ISPMM 2015 ; Conference date: 08-08-2015 Through 12-08-2015",

year = "2016",

doi = "10.1117/12.2211919",

language = "英语",

series = "Proceedings of SPIE - The International Society for Optical Engineering",

publisher = "SPIE",

editor = "Liandong Yu",

booktitle = "Seventh International Symposium on Precision Mechanical Measurements",

address = "美国",

}

Feng, K, Cui, J, Jiang, X, Li, J & Tan, J 2016, Analysis and simulation method of the cantilever FBG sensors. in L Yu (ed.), Seventh International Symposium on Precision Mechanical Measurements., 99031E, Proceedings of SPIE - The International Society for Optical Engineering, vol. 9903, SPIE, 7th International Symposium on Precision Mechanical Measurements, ISPMM 2015, Xia'men, China, 8/08/15. https://doi.org/10.1117/12.2211919

Analysis and simulation method of the cantilever FBG sensors. / Feng, Kunpeng; Cui, Jiwen; Jiang, Xuelin et al.
Seventh International Symposium on Precision Mechanical Measurements. ed. / Liandong Yu. SPIE, 2016. 99031E (Proceedings of SPIE - The International Society for Optical Engineering; Vol. 9903).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - Analysis and simulation method of the cantilever FBG sensors

AU - Feng, Kunpeng

AU - Cui, Jiwen

AU - Jiang, Xuelin

AU - Li, Junying

AU - Tan, Jiubin

PY - 2016

Y1 - 2016

N2 - To enrich the sensing mechanism of the FBG sensors, the cantilever FBG sensor is taken as an example to analyze the effect of the deflection on the embedded stress distribution and structure parameters of the FBG, and a widely applicable analysis method is thus proposed. Models of the single-core and multi-core FBG sensor are built by the proposed method and a modified transmission matrix method is utilized to simulate the built models. The lateral resolution of the multicore FBG sensor is proved to be 1500 times higher than the single-core FBG sensor. Simulation results of the proposed models indicate that this approach is tally with the experiment of other researches, and it can be used to analyze the performance of the designed sensors, such as spectrum signal and resolution, or as a guide of designing FBG sensors.

AB - To enrich the sensing mechanism of the FBG sensors, the cantilever FBG sensor is taken as an example to analyze the effect of the deflection on the embedded stress distribution and structure parameters of the FBG, and a widely applicable analysis method is thus proposed. Models of the single-core and multi-core FBG sensor are built by the proposed method and a modified transmission matrix method is utilized to simulate the built models. The lateral resolution of the multicore FBG sensor is proved to be 1500 times higher than the single-core FBG sensor. Simulation results of the proposed models indicate that this approach is tally with the experiment of other researches, and it can be used to analyze the performance of the designed sensors, such as spectrum signal and resolution, or as a guide of designing FBG sensors.

UR - https://www.scopus.com/pages/publications/84959894046

U2 - 10.1117/12.2211919

DO - 10.1117/12.2211919

M3 - 会议稿件

AN - SCOPUS:84959894046

T3 - Proceedings of SPIE - The International Society for Optical Engineering

BT - Seventh International Symposium on Precision Mechanical Measurements

A2 - Yu, Liandong

PB - SPIE

T2 - 7th International Symposium on Precision Mechanical Measurements, ISPMM 2015

Y2 - 8 August 2015 through 12 August 2015

ER -

Analysis and simulation method of the cantilever FBG sensors

Abstract

Publication series

Conference

Access to Document

Other files and links

Fingerprint

Cite this