An economical and efficient approach for low-temperature fabrication of YSZ-AZ31B heterogenous joint using ultrasonic waves

J. Wang; Z. L. Li; J. H. Fu; S. L. Yi; Y. Shi; X. G. Song; J. C. Feng

doi:10.1016/j.ceramint.2024.12.299

An economical and efficient approach for low-temperature fabrication of YSZ-AZ31B heterogenous joint using ultrasonic waves

J. Wang
, Z. L. Li^*
, J. H. Fu
, S. L. Yi
, Y. Shi
, X. G. Song^*
, J. C. Feng

^*Corresponding author for this work

School of Materials Science and Engineering

Harbin Institute of Technology
Harbin Institute of Technology Weihai

Research output: Contribution to journal › Article › peer-review

Abstract

To meet the low-temperature requirements of the ZrO₂-Mg bonding system, we utilize the ultrasonic diffusion bonding to fabricate YSZ-AZ31B heterogeneous joint. This method has advantages of remarkable efficiency and cost-effectiveness because of the short time (within 8 s), low temperature (200 °C) and cheap filler (Al interlayer) used in the bonding process. The shear strength of the joints reaches 39.4 MPa. It is observed that the amorphous Al₂O₃ and Al₁₂Mg₁₇+α-Mg form at Al/YSZ and Al/AZ31B interfaces, respectively. Further, the joint bonding mechanism under the ultrasonic action is elucidated.

Original language	English
Pages (from-to)	9559-9563
Number of pages	5
Journal	Ceramics International
Volume	51
Issue number	7
DOIs	https://doi.org/10.1016/j.ceramint.2024.12.299
State	Published - Mar 2025

Keywords

Amorphous AlO
Low-temperature diffusion bonding
Ultrasonic waves
YSZ-AZ31B joint

Access to Document

10.1016/j.ceramint.2024.12.299

Cite this

@article{6fbf9231afa645dda0a4ba2660f01daa,

title = "An economical and efficient approach for low-temperature fabrication of YSZ-AZ31B heterogenous joint using ultrasonic waves",

abstract = "To meet the low-temperature requirements of the ZrO2-Mg bonding system, we utilize the ultrasonic diffusion bonding to fabricate YSZ-AZ31B heterogeneous joint. This method has advantages of remarkable efficiency and cost-effectiveness because of the short time (within 8 s), low temperature (200 °C) and cheap filler (Al interlayer) used in the bonding process. The shear strength of the joints reaches 39.4 MPa. It is observed that the amorphous Al2O3 and Al12Mg17+α-Mg form at Al/YSZ and Al/AZ31B interfaces, respectively. Further, the joint bonding mechanism under the ultrasonic action is elucidated.",

keywords = "Amorphous AlO, Low-temperature diffusion bonding, Ultrasonic waves, YSZ-AZ31B joint",

author = "J. Wang and Li, \{Z. L.\} and Fu, \{J. H.\} and Yi, \{S. L.\} and Y. Shi and Song, \{X. G.\} and Feng, \{J. C.\}",

note = "Publisher Copyright: {\textcopyright} 2024 Elsevier Ltd and Techna Group S.r.l.",

year = "2025",

month = mar,

doi = "10.1016/j.ceramint.2024.12.299",

language = "英语",

volume = "51",

pages = "9559--9563",

journal = "Ceramics International",

issn = "0272-8842",

publisher = "Elsevier Ltd",

number = "7",

}

TY - JOUR

T1 - An economical and efficient approach for low-temperature fabrication of YSZ-AZ31B heterogenous joint using ultrasonic waves

AU - Wang, J.

AU - Li, Z. L.

AU - Fu, J. H.

AU - Yi, S. L.

AU - Shi, Y.

AU - Song, X. G.

AU - Feng, J. C.

PY - 2025/3

Y1 - 2025/3

N2 - To meet the low-temperature requirements of the ZrO2-Mg bonding system, we utilize the ultrasonic diffusion bonding to fabricate YSZ-AZ31B heterogeneous joint. This method has advantages of remarkable efficiency and cost-effectiveness because of the short time (within 8 s), low temperature (200 °C) and cheap filler (Al interlayer) used in the bonding process. The shear strength of the joints reaches 39.4 MPa. It is observed that the amorphous Al2O3 and Al12Mg17+α-Mg form at Al/YSZ and Al/AZ31B interfaces, respectively. Further, the joint bonding mechanism under the ultrasonic action is elucidated.

AB - To meet the low-temperature requirements of the ZrO2-Mg bonding system, we utilize the ultrasonic diffusion bonding to fabricate YSZ-AZ31B heterogeneous joint. This method has advantages of remarkable efficiency and cost-effectiveness because of the short time (within 8 s), low temperature (200 °C) and cheap filler (Al interlayer) used in the bonding process. The shear strength of the joints reaches 39.4 MPa. It is observed that the amorphous Al2O3 and Al12Mg17+α-Mg form at Al/YSZ and Al/AZ31B interfaces, respectively. Further, the joint bonding mechanism under the ultrasonic action is elucidated.

KW - Amorphous AlO

KW - Low-temperature diffusion bonding

KW - Ultrasonic waves

KW - YSZ-AZ31B joint

UR - https://www.scopus.com/pages/publications/85212964353

U2 - 10.1016/j.ceramint.2024.12.299

DO - 10.1016/j.ceramint.2024.12.299

M3 - 文章

AN - SCOPUS:85212964353

SN - 0272-8842

VL - 51

SP - 9559

EP - 9563

JO - Ceramics International

JF - Ceramics International

IS - 7

ER -

An economical and efficient approach for low-temperature fabrication of YSZ-AZ31B heterogenous joint using ultrasonic waves

Abstract

Keywords

Access to Document

Other files and links

Fingerprint

Cite this