An easy and novel approach for the decoration of graphene oxide by Fe                          3                         O                         4                          nanoparticles

Ying Li; Jia Chu; Jingyao Qi; Xin Li

doi:10.1016/j.apsusc.2011.01.127

An easy and novel approach for the decoration of graphene oxide by Fe ₃ O ₄ nanoparticles

Ying Li
, Jia Chu
, Jingyao Qi
, Xin Li^*

^*Corresponding author for this work

School of Chemistry and Chemical Engineering

Harbin Institute of Technology
Tiangong University

Research output: Contribution to journal › Article › peer-review

56 Scopus citations

Abstract

A new and relatively general route was developed to fabricate graphene oxide (GO)-Fe ₃ O ₄ hybrid. X-ray diffraction, transmission electron morphology, X-ray photoelectron spectroscopy (XPS) and energy-dispersive spectrum were used to demonstrate the successful attachment of iron oxide nanoparticles to GO sheets. Transmission electron microscopy observation indicates that the size of the Fe ₃ O ₄ nanoparticles was about 2.7 nm with narrow size distribution. Moreover, this hybrid shows superparamagnetic property and allows the rapid separation under an external-magnetic field. In addition, the method could be extended to further development of graphene-based nanoelectronics.

Original language	English
Pages (from-to)	6059-6062
Number of pages	4
Journal	Applied Surface Science
Volume	257
Issue number	14
DOIs	https://doi.org/10.1016/j.apsusc.2011.01.127
State	Published - 1 May 2011

Keywords

Decoration
Graphene oxide
Hybrid

Access to Document

10.1016/j.apsusc.2011.01.127

Cite this

@article{8b414b923e6c443295d330c791b0074c,

title = " An easy and novel approach for the decoration of graphene oxide by Fe 3 O 4 nanoparticles ",

abstract = " A new and relatively general route was developed to fabricate graphene oxide (GO)-Fe 3 O 4 hybrid. X-ray diffraction, transmission electron morphology, X-ray photoelectron spectroscopy (XPS) and energy-dispersive spectrum were used to demonstrate the successful attachment of iron oxide nanoparticles to GO sheets. Transmission electron microscopy observation indicates that the size of the Fe 3 O 4 nanoparticles was about 2.7 nm with narrow size distribution. Moreover, this hybrid shows superparamagnetic property and allows the rapid separation under an external-magnetic field. In addition, the method could be extended to further development of graphene-based nanoelectronics.",

keywords = "Decoration, Graphene oxide, Hybrid",

author = "Ying Li and Jia Chu and Jingyao Qi and Xin Li",

year = "2011",

month = may,

day = "1",

doi = "10.1016/j.apsusc.2011.01.127",

language = "英语",

volume = "257",

pages = "6059--6062",

journal = "Applied Surface Science",

issn = "0169-4332",

publisher = "Elsevier B.V.",

number = "14",

}

Li, Y, Chu, J, Qi, J & Li, X 2011, ' An easy and novel approach for the decoration of graphene oxide by Fe ₃ O ₄ nanoparticles ', Applied Surface Science, vol. 257, no. 14, pp. 6059-6062. https://doi.org/10.1016/j.apsusc.2011.01.127

An easy and novel approach for the decoration of graphene oxide by Fe ₃ O ₄ nanoparticles . / Li, Ying; Chu, Jia; Qi, Jingyao et al.
In: Applied Surface Science, Vol. 257, No. 14, 01.05.2011, p. 6059-6062.

Research output: Contribution to journal › Article › peer-review

TY - JOUR

T1 - An easy and novel approach for the decoration of graphene oxide by Fe 3 O 4 nanoparticles

AU - Li, Ying

AU - Chu, Jia

AU - Qi, Jingyao

AU - Li, Xin

PY - 2011/5/1

Y1 - 2011/5/1

N2 - A new and relatively general route was developed to fabricate graphene oxide (GO)-Fe 3 O 4 hybrid. X-ray diffraction, transmission electron morphology, X-ray photoelectron spectroscopy (XPS) and energy-dispersive spectrum were used to demonstrate the successful attachment of iron oxide nanoparticles to GO sheets. Transmission electron microscopy observation indicates that the size of the Fe 3 O 4 nanoparticles was about 2.7 nm with narrow size distribution. Moreover, this hybrid shows superparamagnetic property and allows the rapid separation under an external-magnetic field. In addition, the method could be extended to further development of graphene-based nanoelectronics.

AB - A new and relatively general route was developed to fabricate graphene oxide (GO)-Fe 3 O 4 hybrid. X-ray diffraction, transmission electron morphology, X-ray photoelectron spectroscopy (XPS) and energy-dispersive spectrum were used to demonstrate the successful attachment of iron oxide nanoparticles to GO sheets. Transmission electron microscopy observation indicates that the size of the Fe 3 O 4 nanoparticles was about 2.7 nm with narrow size distribution. Moreover, this hybrid shows superparamagnetic property and allows the rapid separation under an external-magnetic field. In addition, the method could be extended to further development of graphene-based nanoelectronics.

KW - Decoration

KW - Graphene oxide

KW - Hybrid

UR - https://www.scopus.com/pages/publications/79953024636

U2 - 10.1016/j.apsusc.2011.01.127

DO - 10.1016/j.apsusc.2011.01.127

M3 - 文章

AN - SCOPUS:79953024636

SN - 0169-4332

VL - 257

SP - 6059

EP - 6062

JO - Applied Surface Science

JF - Applied Surface Science

IS - 14

ER -

An easy and novel approach for the decoration of graphene oxide by Fe ₃ O ₄ nanoparticles

Abstract

Keywords

Access to Document

Other files and links

Fingerprint

Cite this