Active brazing of YAG crystal and Cu using AgCuInTi filler: Microstructure and joint properties

Haoran Yang; Chun Li; Xiaoqing Si; Junlei Qi; Jian Cao

doi:10.1016/j.matchar.2024.113867

Active brazing of YAG crystal and Cu using AgCuInTi filler: Microstructure and joint properties

Haoran Yang
, Chun Li^*
, Xiaoqing Si
, Junlei Qi
, Jian Cao

^*Corresponding author for this work

School of Materials Science and Engineering

Harbin Institute of Technology

Research output: Contribution to journal › Article › peer-review

12 Scopus citations

Abstract

YAG crystal is successfully brazed with Cu using active filler AgCuInTi. The microstructure and mechanical properties of the brazed joints are investigated. The effects of brazing time and holding time on the interfacial microstructure and joint mechanical strength are studied. The joints brazed at 600 °C for 20 min are found to show the highest shear strength of 38.3 MPa, reaching 79.6% of the YAG base material.

Original language	English
Article number	113867
Journal	Materials Characterization
Volume	211
DOIs	https://doi.org/10.1016/j.matchar.2024.113867
State	Published - May 2024

Keywords

Brazing
Interfacial microstructure
Mechanical properties
YAG ceramic

Access to Document

10.1016/j.matchar.2024.113867

Cite this

@article{87a3293ff01a4fa5a8a5ebc6d1241ba4,

title = "Active brazing of YAG crystal and Cu using AgCuInTi filler: Microstructure and joint properties",

abstract = "YAG crystal is successfully brazed with Cu using active filler AgCuInTi. The microstructure and mechanical properties of the brazed joints are investigated. The effects of brazing time and holding time on the interfacial microstructure and joint mechanical strength are studied. The joints brazed at 600 °C for 20 min are found to show the highest shear strength of 38.3 MPa, reaching 79.6\% of the YAG base material.",

keywords = "Brazing, Interfacial microstructure, Mechanical properties, YAG ceramic",

author = "Haoran Yang and Chun Li and Xiaoqing Si and Junlei Qi and Jian Cao",

note = "Publisher Copyright: {\textcopyright} 2023",

year = "2024",

month = may,

doi = "10.1016/j.matchar.2024.113867",

language = "英语",

volume = "211",

journal = "Materials Characterization",

issn = "1044-5803",

publisher = "Elsevier Inc.",

}

TY - JOUR

T1 - Active brazing of YAG crystal and Cu using AgCuInTi filler

T2 - Microstructure and joint properties

AU - Yang, Haoran

AU - Li, Chun

AU - Si, Xiaoqing

AU - Qi, Junlei

AU - Cao, Jian

PY - 2024/5

Y1 - 2024/5

N2 - YAG crystal is successfully brazed with Cu using active filler AgCuInTi. The microstructure and mechanical properties of the brazed joints are investigated. The effects of brazing time and holding time on the interfacial microstructure and joint mechanical strength are studied. The joints brazed at 600 °C for 20 min are found to show the highest shear strength of 38.3 MPa, reaching 79.6% of the YAG base material.

AB - YAG crystal is successfully brazed with Cu using active filler AgCuInTi. The microstructure and mechanical properties of the brazed joints are investigated. The effects of brazing time and holding time on the interfacial microstructure and joint mechanical strength are studied. The joints brazed at 600 °C for 20 min are found to show the highest shear strength of 38.3 MPa, reaching 79.6% of the YAG base material.

KW - Brazing

KW - Interfacial microstructure

KW - Mechanical properties

KW - YAG ceramic

UR - https://www.scopus.com/pages/publications/85189550368

U2 - 10.1016/j.matchar.2024.113867

DO - 10.1016/j.matchar.2024.113867

M3 - 文章

AN - SCOPUS:85189550368

SN - 1044-5803

VL - 211

JO - Materials Characterization

JF - Materials Characterization

M1 - 113867

ER -

Active brazing of YAG crystal and Cu using AgCuInTi filler: Microstructure and joint properties

Abstract

Keywords

Access to Document

Other files and links

Fingerprint

Cite this