Ablation resistance of ZrB2-SiC-AlN ceramic composites

Gang Li; Wenbo Han; Xinghong Zhang; Jiecai Han; Songhe Meng

doi:10.1016/j.jallcom.2008.12.036

Ablation resistance of ZrB₂-SiC-AlN ceramic composites

Gang Li^*
, Wenbo Han
, Xinghong Zhang
, Jiecai Han
, Songhe Meng

^*Corresponding author for this work

School of Astronautics

Harbin Institute of Technology
Harbin University of Science and Technology

Research output: Contribution to journal › Article › peer-review

34 Scopus citations

Abstract

ZrB₂-20 vol.%SiC-5 vol.%AlN ceramic composites (ZSA) were fabricated by hot pressing sintering under inert gas protected, which mechanical properties were improved obviously by introducing AlN as sintering aid. Ablation tests of ZSA were conducted with different heat flux parameters in high frequency plasma wind tunnel. The results showed that ZSA exhibited excellent ablation resistance at 2000 °C for 300 s in oxidation environment and a dense coherent scale was formed after ablation, whereas a strong degradation and mass loss were observed at 2600 °C for 300 s. The ablation behavior, microstructures evolvement and the effect of AlN were analyzed.

Original language	English
Pages (from-to)	299-302
Number of pages	4
Journal	Journal of Alloys and Compounds
Volume	479
Issue number	1-2
DOIs	https://doi.org/10.1016/j.jallcom.2008.12.036
State	Published - 24 Jun 2009

Keywords

Ablation resistance
High frequency plasma wind tunnel
ZrB-SiC-AlN ceramic composite

Access to Document

10.1016/j.jallcom.2008.12.036

Cite this

@article{fbef116c7b50440c91a5a01747842068,

title = "Ablation resistance of ZrB2-SiC-AlN ceramic composites",

abstract = "ZrB2-20 vol.\%SiC-5 vol.\%AlN ceramic composites (ZSA) were fabricated by hot pressing sintering under inert gas protected, which mechanical properties were improved obviously by introducing AlN as sintering aid. Ablation tests of ZSA were conducted with different heat flux parameters in high frequency plasma wind tunnel. The results showed that ZSA exhibited excellent ablation resistance at 2000 °C for 300 s in oxidation environment and a dense coherent scale was formed after ablation, whereas a strong degradation and mass loss were observed at 2600 °C for 300 s. The ablation behavior, microstructures evolvement and the effect of AlN were analyzed.",

keywords = "Ablation resistance, High frequency plasma wind tunnel, ZrB-SiC-AlN ceramic composite",

author = "Gang Li and Wenbo Han and Xinghong Zhang and Jiecai Han and Songhe Meng",

year = "2009",

month = jun,

day = "24",

doi = "10.1016/j.jallcom.2008.12.036",

language = "英语",

volume = "479",

pages = "299--302",

journal = "Journal of Alloys and Compounds",

issn = "0925-8388",

publisher = "Elsevier B.V.",

number = "1-2",

}

TY - JOUR

T1 - Ablation resistance of ZrB2-SiC-AlN ceramic composites

AU - Li, Gang

AU - Han, Wenbo

AU - Zhang, Xinghong

AU - Han, Jiecai

AU - Meng, Songhe

PY - 2009/6/24

Y1 - 2009/6/24

N2 - ZrB2-20 vol.%SiC-5 vol.%AlN ceramic composites (ZSA) were fabricated by hot pressing sintering under inert gas protected, which mechanical properties were improved obviously by introducing AlN as sintering aid. Ablation tests of ZSA were conducted with different heat flux parameters in high frequency plasma wind tunnel. The results showed that ZSA exhibited excellent ablation resistance at 2000 °C for 300 s in oxidation environment and a dense coherent scale was formed after ablation, whereas a strong degradation and mass loss were observed at 2600 °C for 300 s. The ablation behavior, microstructures evolvement and the effect of AlN were analyzed.

AB - ZrB2-20 vol.%SiC-5 vol.%AlN ceramic composites (ZSA) were fabricated by hot pressing sintering under inert gas protected, which mechanical properties were improved obviously by introducing AlN as sintering aid. Ablation tests of ZSA were conducted with different heat flux parameters in high frequency plasma wind tunnel. The results showed that ZSA exhibited excellent ablation resistance at 2000 °C for 300 s in oxidation environment and a dense coherent scale was formed after ablation, whereas a strong degradation and mass loss were observed at 2600 °C for 300 s. The ablation behavior, microstructures evolvement and the effect of AlN were analyzed.

KW - Ablation resistance

KW - High frequency plasma wind tunnel

KW - ZrB-SiC-AlN ceramic composite

UR - https://www.scopus.com/pages/publications/67349117802

U2 - 10.1016/j.jallcom.2008.12.036

DO - 10.1016/j.jallcom.2008.12.036

M3 - 文章

AN - SCOPUS:67349117802

SN - 0925-8388

VL - 479

SP - 299

EP - 302

JO - Journal of Alloys and Compounds

JF - Journal of Alloys and Compounds

IS - 1-2

ER -

Ablation resistance of ZrB₂-SiC-AlN ceramic composites

Abstract

Keywords

Access to Document

Other files and links

Fingerprint

Cite this