A study on graphitization of diamond in copper-diamond composite materials

W. Z. Shao; V. V. Ivanov; L. Zhen; Y. S. Cui; Y. Wang

doi:10.1016/S0167-577X(03)00433-6

A study on graphitization of diamond in copper-diamond composite materials

W. Z. Shao^*
, V. V. Ivanov
, L. Zhen
, Y. S. Cui
, Y. Wang

^*Corresponding author for this work

School of Materials Science and Engineering

Siberian Federal University
Harbin Institute of Technology

Research output: Contribution to journal › Article › peer-review

103 Scopus citations

Abstract

The graphitization of diamond particles in the copper-diamond composite materials used for low voltage electro-contacts was investigated by SEM, TEM and X-ray diffraction (XRD) analyses. The results show that although diamond is a metastable allotropic modification of carbon, the diamond particles are not graphitized to an apparent extent after sintering at 1150-1220 K in the copper-diamond composite. The reason for this phenomenon was discussed. The diamond powders prepared by explosion synthetic method are supposed to possess higher resistance to graphitization and thus benefit the performance of the copper-diamond composite used for electro-contacts.

Original language	English
Pages (from-to)	146-149
Number of pages	4
Journal	Materials Letters
Volume	58
Issue number	1-2
DOIs	https://doi.org/10.1016/S0167-577X(03)00433-6
State	Published - Jan 2004

Keywords

Copper-diamond composite
Diamond powders
Electro-contacts
Graphitization

Access to Document

10.1016/S0167-577X(03)00433-6

Cite this

@article{02b352dcaffe422380b2276dab3d04ed,

title = "A study on graphitization of diamond in copper-diamond composite materials",

abstract = "The graphitization of diamond particles in the copper-diamond composite materials used for low voltage electro-contacts was investigated by SEM, TEM and X-ray diffraction (XRD) analyses. The results show that although diamond is a metastable allotropic modification of carbon, the diamond particles are not graphitized to an apparent extent after sintering at 1150-1220 K in the copper-diamond composite. The reason for this phenomenon was discussed. The diamond powders prepared by explosion synthetic method are supposed to possess higher resistance to graphitization and thus benefit the performance of the copper-diamond composite used for electro-contacts.",

keywords = "Copper-diamond composite, Diamond powders, Electro-contacts, Graphitization",

author = "Shao, \{W. Z.\} and Ivanov, \{V. V.\} and L. Zhen and Cui, \{Y. S.\} and Y. Wang",

year = "2004",

month = jan,

doi = "10.1016/S0167-577X(03)00433-6",

language = "英语",

volume = "58",

pages = "146--149",

journal = "Materials Letters",

issn = "0167-577X",

publisher = "Elsevier B.V.",

number = "1-2",

}

TY - JOUR

T1 - A study on graphitization of diamond in copper-diamond composite materials

AU - Shao, W. Z.

AU - Ivanov, V. V.

AU - Zhen, L.

AU - Cui, Y. S.

AU - Wang, Y.

PY - 2004/1

Y1 - 2004/1

N2 - The graphitization of diamond particles in the copper-diamond composite materials used for low voltage electro-contacts was investigated by SEM, TEM and X-ray diffraction (XRD) analyses. The results show that although diamond is a metastable allotropic modification of carbon, the diamond particles are not graphitized to an apparent extent after sintering at 1150-1220 K in the copper-diamond composite. The reason for this phenomenon was discussed. The diamond powders prepared by explosion synthetic method are supposed to possess higher resistance to graphitization and thus benefit the performance of the copper-diamond composite used for electro-contacts.

AB - The graphitization of diamond particles in the copper-diamond composite materials used for low voltage electro-contacts was investigated by SEM, TEM and X-ray diffraction (XRD) analyses. The results show that although diamond is a metastable allotropic modification of carbon, the diamond particles are not graphitized to an apparent extent after sintering at 1150-1220 K in the copper-diamond composite. The reason for this phenomenon was discussed. The diamond powders prepared by explosion synthetic method are supposed to possess higher resistance to graphitization and thus benefit the performance of the copper-diamond composite used for electro-contacts.

KW - Copper-diamond composite

KW - Diamond powders

KW - Electro-contacts

KW - Graphitization

UR - https://www.scopus.com/pages/publications/0242406889

U2 - 10.1016/S0167-577X(03)00433-6

DO - 10.1016/S0167-577X(03)00433-6

M3 - 文章

AN - SCOPUS:0242406889

SN - 0167-577X

VL - 58

SP - 146

EP - 149

JO - Materials Letters

JF - Materials Letters

IS - 1-2

ER -

A study on graphitization of diamond in copper-diamond composite materials

Abstract

Keywords

Access to Document

Other files and links

Fingerprint

Cite this