A study of electrodepositing Sn-SiC composite coatings with good welding performances

Xiaoyan Li; Jinqiu Zhang; Peixia Yang; Maozhong An

doi:10.1039/c3ra42742k

A study of electrodepositing Sn-SiC composite coatings with good welding performances

Xiaoyan Li
, Jinqiu Zhang
, Peixia Yang
, Maozhong An^*

^*Corresponding author for this work

School of Chemistry and Chemical Engineering, Harbin Institute of Technology

Research output: Contribution to journal › Article › peer-review

4 Scopus citations

Abstract

Sn-SiC composite coatings with a good welding performance were electrodeposited in a bath containing 55 g L^-1 Sn(CH ₃SO₃)₂, 160 g L^-1 methyl sulfonic acid (MSA), 10 mg L^-1 OP-21, 30 g L^-1 SiC nano-particles and 50 mg L^-1 sodium dodecyl sulfate (SDS), at an inclination angle of the plating tank of 45°, a temperature of 20 °C and a cathode-current density of 3 A dm^-2 for 15 minutes. The incorporation of SiC nano-particles in the Sn deposits refines the crystalline grains. The solder spreading performance and Sn whiskers of the Sn-SiC coatings composited with 1.0-2.3 wt% SiC are better and smaller than that of the pure Sn coating, respectively. Only when the intercalation of SiC nano-particles into the Sn grain boundary is firm and homogeneous could coatings with a good welding performance be obtained.

Original language	English
Pages (from-to)	5853-5859
Number of pages	7
Journal	RSC Advances
Volume	4
Issue number	12
DOIs	https://doi.org/10.1039/c3ra42742k
State	Published - 2014
Externally published	Yes

Access to Document

10.1039/c3ra42742k

Cite this

@article{bb8cc304ede843b58eff2f8cb6b5a98a,

title = "A study of electrodepositing Sn-SiC composite coatings with good welding performances",

abstract = "Sn-SiC composite coatings with a good welding performance were electrodeposited in a bath containing 55 g L-1 Sn(CH 3SO3)2, 160 g L-1 methyl sulfonic acid (MSA), 10 mg L-1 OP-21, 30 g L-1 SiC nano-particles and 50 mg L-1 sodium dodecyl sulfate (SDS), at an inclination angle of the plating tank of 45°, a temperature of 20 °C and a cathode-current density of 3 A dm-2 for 15 minutes. The incorporation of SiC nano-particles in the Sn deposits refines the crystalline grains. The solder spreading performance and Sn whiskers of the Sn-SiC coatings composited with 1.0-2.3 wt\% SiC are better and smaller than that of the pure Sn coating, respectively. Only when the intercalation of SiC nano-particles into the Sn grain boundary is firm and homogeneous could coatings with a good welding performance be obtained.",

author = "Xiaoyan Li and Jinqiu Zhang and Peixia Yang and Maozhong An",

year = "2014",

doi = "10.1039/c3ra42742k",

language = "英语",

volume = "4",

pages = "5853--5859",

journal = "RSC Advances",

issn = "2046-2069",

publisher = "Royal Society of Chemistry",

number = "12",

}

TY - JOUR

T1 - A study of electrodepositing Sn-SiC composite coatings with good welding performances

AU - Li, Xiaoyan

AU - Zhang, Jinqiu

AU - Yang, Peixia

AU - An, Maozhong

PY - 2014

Y1 - 2014

N2 - Sn-SiC composite coatings with a good welding performance were electrodeposited in a bath containing 55 g L-1 Sn(CH 3SO3)2, 160 g L-1 methyl sulfonic acid (MSA), 10 mg L-1 OP-21, 30 g L-1 SiC nano-particles and 50 mg L-1 sodium dodecyl sulfate (SDS), at an inclination angle of the plating tank of 45°, a temperature of 20 °C and a cathode-current density of 3 A dm-2 for 15 minutes. The incorporation of SiC nano-particles in the Sn deposits refines the crystalline grains. The solder spreading performance and Sn whiskers of the Sn-SiC coatings composited with 1.0-2.3 wt% SiC are better and smaller than that of the pure Sn coating, respectively. Only when the intercalation of SiC nano-particles into the Sn grain boundary is firm and homogeneous could coatings with a good welding performance be obtained.

AB - Sn-SiC composite coatings with a good welding performance were electrodeposited in a bath containing 55 g L-1 Sn(CH 3SO3)2, 160 g L-1 methyl sulfonic acid (MSA), 10 mg L-1 OP-21, 30 g L-1 SiC nano-particles and 50 mg L-1 sodium dodecyl sulfate (SDS), at an inclination angle of the plating tank of 45°, a temperature of 20 °C and a cathode-current density of 3 A dm-2 for 15 minutes. The incorporation of SiC nano-particles in the Sn deposits refines the crystalline grains. The solder spreading performance and Sn whiskers of the Sn-SiC coatings composited with 1.0-2.3 wt% SiC are better and smaller than that of the pure Sn coating, respectively. Only when the intercalation of SiC nano-particles into the Sn grain boundary is firm and homogeneous could coatings with a good welding performance be obtained.

UR - https://www.scopus.com/pages/publications/84892143883

U2 - 10.1039/c3ra42742k

DO - 10.1039/c3ra42742k

M3 - 文章

AN - SCOPUS:84892143883

SN - 2046-2069

VL - 4

SP - 5853

EP - 5859

JO - RSC Advances

JF - RSC Advances

IS - 12

ER -

A study of electrodepositing Sn-SiC composite coatings with good welding performances

Abstract

Access to Document

Other files and links

Fingerprint

Cite this