A novel power supply for high speed drilling electrical discharge machining base on pulsed width modulated

H. Huang; J. C. Bai; Z. S. Lu; Y. F. Guo

doi:10.4028/www.scientific.net/MSF.626-627.285

A novel power supply for high speed drilling electrical discharge machining base on pulsed width modulated

H. Huang^*
, J. C. Bai
, Z. S. Lu
, Y. F. Guo

^*Corresponding author for this work

School of Mechatronics Engineering

Harbin Institute of Technology

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

Abstract

In this paper, a novel Pulsed-Width-Modulated (PWM) half-bridge High Speed Drilling Electrical Discharge Machining (HSDEDM) power supply has been developed. This power supply has excellent features that include minimal component count and inherent protection. This topology has an energy conservation feature and eliminates the output bulk capacitors and current limiting resistances. Energy used in the erosion process will be controlled by the switched Insulated Gate Bipolar Transistors (IGBTs) in the half-bridge network and be transferred to the gap between the tool and work-piece. The relative tool wear and machining speed of our proposed topology have been compared with that of a normal power supply with current limiting resistances.

Original language	English
Title of host publication	Advances in Materials Manufacturing Science and Technology XIII
Subtitle of host publication	Advanced Manufacturing Technology and Equipment, and Manufacturing Systems and Automation
Publisher	Trans Tech Publications Ltd
Pages	285-290
Number of pages	6
ISBN (Print)	0878493115, 9780878493111
DOIs	https://doi.org/10.4028/www.scientific.net/MSF.626-627.285
State	Published - 2009
Event	13th International Manufacturing Conference in China, IMCC2009 - Dalian, China Duration: 21 Sep 2009 → 23 Sep 2009

Publication series

Name	Materials Science Forum
Volume	626 627
ISSN (Print)	0255-5476
ISSN (Electronic)	1662-9752

Conference

Conference	13th International Manufacturing Conference in China, IMCC2009
Country/Territory	China
City	Dalian
Period	21/09/09 → 23/09/09

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

SDG 7 Affordable and Clean Energy

Keywords

Half-bridge power supply
High speed drilling electrical discharge machining
Pulsed width modulated

Access to Document

10.4028/www.scientific.net/MSF.626-627.285

Cite this

Huang, H., Bai, J. C., Lu, Z. S., & Guo, Y. F. (2009). A novel power supply for high speed drilling electrical discharge machining base on pulsed width modulated. In Advances in Materials Manufacturing Science and Technology XIII: Advanced Manufacturing Technology and Equipment, and Manufacturing Systems and Automation (pp. 285-290). (Materials Science Forum; Vol. 626 627). Trans Tech Publications Ltd. https://doi.org/10.4028/www.scientific.net/MSF.626-627.285

Huang, H. ; Bai, J. C. ; Lu, Z. S. et al. / A novel power supply for high speed drilling electrical discharge machining base on pulsed width modulated. Advances in Materials Manufacturing Science and Technology XIII: Advanced Manufacturing Technology and Equipment, and Manufacturing Systems and Automation. Trans Tech Publications Ltd, 2009. pp. 285-290 (Materials Science Forum).

@inproceedings{8d87da039fc7473a8a7ab303c67add07,

title = "A novel power supply for high speed drilling electrical discharge machining base on pulsed width modulated",

abstract = "In this paper, a novel Pulsed-Width-Modulated (PWM) half-bridge High Speed Drilling Electrical Discharge Machining (HSDEDM) power supply has been developed. This power supply has excellent features that include minimal component count and inherent protection. This topology has an energy conservation feature and eliminates the output bulk capacitors and current limiting resistances. Energy used in the erosion process will be controlled by the switched Insulated Gate Bipolar Transistors (IGBTs) in the half-bridge network and be transferred to the gap between the tool and work-piece. The relative tool wear and machining speed of our proposed topology have been compared with that of a normal power supply with current limiting resistances.",

keywords = "Half-bridge power supply, High speed drilling electrical discharge machining, Pulsed width modulated",

author = "H. Huang and Bai, \{J. C.\} and Lu, \{Z. S.\} and Guo, \{Y. F.\}",

year = "2009",

doi = "10.4028/www.scientific.net/MSF.626-627.285",

language = "英语",

isbn = "0878493115",

series = "Materials Science Forum",

publisher = "Trans Tech Publications Ltd",

pages = "285--290",

booktitle = "Advances in Materials Manufacturing Science and Technology XIII",

address = "瑞士",

note = "13th International Manufacturing Conference in China, IMCC2009 ; Conference date: 21-09-2009 Through 23-09-2009",

}

Huang, H, Bai, JC, Lu, ZS & Guo, YF 2009, A novel power supply for high speed drilling electrical discharge machining base on pulsed width modulated. in Advances in Materials Manufacturing Science and Technology XIII: Advanced Manufacturing Technology and Equipment, and Manufacturing Systems and Automation. Materials Science Forum, vol. 626 627, Trans Tech Publications Ltd, pp. 285-290, 13th International Manufacturing Conference in China, IMCC2009, Dalian, China, 21/09/09. https://doi.org/10.4028/www.scientific.net/MSF.626-627.285

A novel power supply for high speed drilling electrical discharge machining base on pulsed width modulated. / Huang, H.; Bai, J. C.; Lu, Z. S. et al.
Advances in Materials Manufacturing Science and Technology XIII: Advanced Manufacturing Technology and Equipment, and Manufacturing Systems and Automation. Trans Tech Publications Ltd, 2009. p. 285-290 (Materials Science Forum; Vol. 626 627).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - A novel power supply for high speed drilling electrical discharge machining base on pulsed width modulated

AU - Huang, H.

AU - Bai, J. C.

AU - Lu, Z. S.

AU - Guo, Y. F.

PY - 2009

Y1 - 2009

N2 - In this paper, a novel Pulsed-Width-Modulated (PWM) half-bridge High Speed Drilling Electrical Discharge Machining (HSDEDM) power supply has been developed. This power supply has excellent features that include minimal component count and inherent protection. This topology has an energy conservation feature and eliminates the output bulk capacitors and current limiting resistances. Energy used in the erosion process will be controlled by the switched Insulated Gate Bipolar Transistors (IGBTs) in the half-bridge network and be transferred to the gap between the tool and work-piece. The relative tool wear and machining speed of our proposed topology have been compared with that of a normal power supply with current limiting resistances.

AB - In this paper, a novel Pulsed-Width-Modulated (PWM) half-bridge High Speed Drilling Electrical Discharge Machining (HSDEDM) power supply has been developed. This power supply has excellent features that include minimal component count and inherent protection. This topology has an energy conservation feature and eliminates the output bulk capacitors and current limiting resistances. Energy used in the erosion process will be controlled by the switched Insulated Gate Bipolar Transistors (IGBTs) in the half-bridge network and be transferred to the gap between the tool and work-piece. The relative tool wear and machining speed of our proposed topology have been compared with that of a normal power supply with current limiting resistances.

KW - Half-bridge power supply

KW - High speed drilling electrical discharge machining

KW - Pulsed width modulated

UR - https://www.scopus.com/pages/publications/70449579141

U2 - 10.4028/www.scientific.net/MSF.626-627.285

DO - 10.4028/www.scientific.net/MSF.626-627.285

M3 - 会议稿件

AN - SCOPUS:70449579141

SN - 0878493115

SN - 9780878493111

T3 - Materials Science Forum

SP - 285

EP - 290

BT - Advances in Materials Manufacturing Science and Technology XIII

PB - Trans Tech Publications Ltd

T2 - 13th International Manufacturing Conference in China, IMCC2009

Y2 - 21 September 2009 through 23 September 2009

ER -

Huang H, Bai JC, Lu ZS, Guo YF. A novel power supply for high speed drilling electrical discharge machining base on pulsed width modulated. In Advances in Materials Manufacturing Science and Technology XIII: Advanced Manufacturing Technology and Equipment, and Manufacturing Systems and Automation. Trans Tech Publications Ltd. 2009. p. 285-290. (Materials Science Forum). doi: 10.4028/www.scientific.net/MSF.626-627.285

A novel power supply for high speed drilling electrical discharge machining base on pulsed width modulated

Abstract

Publication series

Conference

UN SDGs

Keywords

Access to Document

Other files and links

Fingerprint

Cite this