A micro-deposition method by using EDM

B. D. Jin; G. H. Cao; Z. L. Wang; W. S. Zhao

doi:10.4028/0-87849-430-8.32

A micro-deposition method by using EDM

B. D. Jin^*
, G. H. Cao
, Z. L. Wang
, W. S. Zhao

^*Corresponding author for this work

School of Mechatronics Engineering

Harbin Institute of Technology

Research output: Contribution to journal › Article › peer-review

4 Scopus citations

Abstract

A new micro EDM method is described. First, the basic principles of micro EDD are analyzed and realized conditions are predicted. Then with an ordinary EDM shaping machine and electrode brass, steel and tungsten, a large number of experiments are carried out in air to obtain the effects of different processing parameters on micro EDD. A micro cylinder with 0.19mm in diameter and 7.35mm in height is formed on high-speed steel surface. By exchanging the polarities of electrode and workpiece the deposited material can be removed selectively, thus the reversible machining is realized. In the end, measurements show that the deposited material is compact and hardened, whose components depend on the tool electrode material although Zn in brass electrode is oxidized to ZnO.

Original language	English
Pages (from-to)	32-36
Number of pages	5
Journal	Key Engineering Materials
Volume	339
DOIs	https://doi.org/10.4028/0-87849-430-8.32
State	Published - 2007

Keywords

Electrical discharge deposition (EDD)
Electrical discharge machining (EDM)
Processing parameters
Reversible machining

Access to Document

10.4028/0-87849-430-8.32

Cite this

@article{be5d32b8bc3643d1b5d788d2f7c9e20e,

title = "A micro-deposition method by using EDM",

abstract = "A new micro EDM method is described. First, the basic principles of micro EDD are analyzed and realized conditions are predicted. Then with an ordinary EDM shaping machine and electrode brass, steel and tungsten, a large number of experiments are carried out in air to obtain the effects of different processing parameters on micro EDD. A micro cylinder with 0.19mm in diameter and 7.35mm in height is formed on high-speed steel surface. By exchanging the polarities of electrode and workpiece the deposited material can be removed selectively, thus the reversible machining is realized. In the end, measurements show that the deposited material is compact and hardened, whose components depend on the tool electrode material although Zn in brass electrode is oxidized to ZnO.",

keywords = "Electrical discharge deposition (EDD), Electrical discharge machining (EDM), Processing parameters, Reversible machining",

author = "Jin, \{B. D.\} and Cao, \{G. H.\} and Wang, \{Z. L.\} and Zhao, \{W. S.\}",

year = "2007",

doi = "10.4028/0-87849-430-8.32",

language = "英语",

volume = "339",

pages = "32--36",

journal = "Key Engineering Materials",

issn = "1013-9826",

publisher = "Trans Tech Publications Ltd",

}

TY - JOUR

T1 - A micro-deposition method by using EDM

AU - Jin, B. D.

AU - Cao, G. H.

AU - Wang, Z. L.

AU - Zhao, W. S.

PY - 2007

Y1 - 2007

N2 - A new micro EDM method is described. First, the basic principles of micro EDD are analyzed and realized conditions are predicted. Then with an ordinary EDM shaping machine and electrode brass, steel and tungsten, a large number of experiments are carried out in air to obtain the effects of different processing parameters on micro EDD. A micro cylinder with 0.19mm in diameter and 7.35mm in height is formed on high-speed steel surface. By exchanging the polarities of electrode and workpiece the deposited material can be removed selectively, thus the reversible machining is realized. In the end, measurements show that the deposited material is compact and hardened, whose components depend on the tool electrode material although Zn in brass electrode is oxidized to ZnO.

AB - A new micro EDM method is described. First, the basic principles of micro EDD are analyzed and realized conditions are predicted. Then with an ordinary EDM shaping machine and electrode brass, steel and tungsten, a large number of experiments are carried out in air to obtain the effects of different processing parameters on micro EDD. A micro cylinder with 0.19mm in diameter and 7.35mm in height is formed on high-speed steel surface. By exchanging the polarities of electrode and workpiece the deposited material can be removed selectively, thus the reversible machining is realized. In the end, measurements show that the deposited material is compact and hardened, whose components depend on the tool electrode material although Zn in brass electrode is oxidized to ZnO.

KW - Electrical discharge deposition (EDD)

KW - Electrical discharge machining (EDM)

KW - Processing parameters

KW - Reversible machining

UR - https://www.scopus.com/pages/publications/33947255657

U2 - 10.4028/0-87849-430-8.32

DO - 10.4028/0-87849-430-8.32

M3 - 文章

AN - SCOPUS:33947255657

SN - 1013-9826

VL - 339

SP - 32

EP - 36

JO - Key Engineering Materials

JF - Key Engineering Materials

ER -

A micro-deposition method by using EDM

Abstract

Keywords

Access to Document

Other files and links

Fingerprint

Cite this