Skip to main navigation Skip to search Skip to main content

鲁米诺电化学发光中关键中间体的在线质谱表征

Translated title of the contribution: On-line Mass Spectrometric Characterization of Key Intermediates in Luminol Electrochemiluminescence
  • School of Marine Science and Technology, Harbin Institute of Technology Weihai
  • School of Chemistry and Chemical Engineering, Harbin Institute of Technology

Research output: Contribution to journalArticlepeer-review

Abstract

Due to the low oxidation potential and high electrochemiluminescence (ECL) quantum yield, Luminol has been widely applied in analytical and detection fields, especially in immunoassay, food safety and environmental monitoring. However, there is a lack of sufficient experimental evidence on the ECL mechanism of Luminol, which affects the further improvement of its ECL efficiency. Herein, an electrochemistry-micro tube-mass spectrometry (EC-MT-MS) device was constructed for on-line monitoring of Luminol ECL reaction. In this EC-MT-MS device, a high borosilicate glass tube with a nano tip was used as electrochemical cell and electrospray ionization source, a platinum working electrode and a platinum counter electrode were inserted into the tube and connected to a customized power station, which could simultaneously input a low voltage (volt level) for the ECL reaction and a high voltage (kilovolt level) for the formation of electrospray. Prior to the EC-MT-MS experiment, the composition of the reaction solution was optimized to obtain the highest MS signal response, and Luminol was dissolved in acetonitrile-water (4: 1, V/V) solvent with ammonium acetate as the electrolyte. The concentrations of Luminol and ammonium acetate in the prepared solution were both 0. 1 mmol/L, and the pH was adjusted to 11 using ammonium aqueous. The oxidation potential of Luminol was subsequently studied using a traditional three-electrode system by cyclic voltammetry in the same solution, and the determined oxidation potential for ECL reaction was 0. 87 V. During the EC-MT-MS measurements, (2. 5 kV + 0. 87 V) and 2. 5 kV were input to the working and counter through the power station, respectively. A series of short-lived intermediates and products such as Lj (m/z 198) and the luminescent precursor AP~ (m/z 180) in the Luminol ECL reaction process were successfully captured and analyzed by MS. The molecular structures of these products were characterized by tandem mass spectrometry (MS") technique. There are mainly two fragments of m/z 163, 136 present in the MS2 spectrum of luminescent precursor AP~, attributed to the (NH2 + H) and COO losses, respectively. In addition, the promotion mechanism of hydrogen peroxide (H202) for the ECL performance of Luminol was also investigated. A key reaction intermediate L02H~ was found in the MS spectrum at m/z 208. Meanwhile, the peak intensity of luminescent precursor AP~ significantly increased from 1. 3% to 15. 7%, proving that the presence of H202 effectively promoted the generation of key luminescent intermediate. Finally, by adding 1,4-benzoquinone to the Luminol-H202 system, the central role of the superoxide anion radical (02~) derived from H202 in the Luminol ECL process was confirmed. The relevant results provide a direct data reference for the study of the Luminol ECL mechanism.

Translated title of the contributionOn-line Mass Spectrometric Characterization of Key Intermediates in Luminol Electrochemiluminescence
Original languageChinese (Traditional)
Pages (from-to)141-148
Number of pages8
JournalJournal of Chinese Mass Spectrometry Society
Volume45
Issue number1
DOIs
StatePublished - Jan 2024
Externally publishedYes

Fingerprint

Dive into the research topics of 'On-line Mass Spectrometric Characterization of Key Intermediates in Luminol Electrochemiluminescence'. Together they form a unique fingerprint.

Cite this