氮化钛陶瓷力学性能与结构关系

Haitao Wang; Zhiyuan Zhang; Yuanpeng Zhang; Yun Bai; Dejian Liang; Runqiang Chi; Baojun Pang

doi:10.3969/j.issn.1001-9731.2018.07.016

氮化钛陶瓷力学性能与结构关系

Translated title of the contribution: The relationship between dynamic mechanical properties and structure of TiN cermet

Haitao Wang^*
, Zhiyuan Zhang
, Yuanpeng Zhang
, Yun Bai
, Dejian Liang
, Runqiang Chi
, Baojun Pang

^*Corresponding author for this work

State Key Laboratory of NBC Protection for Civilian
School of Astronautics, Harbin Institute of Technology

Research output: Contribution to journal › Article › peer-review

Abstract

The quasi-static and dynamic stress-strain curves of the TiN cermet were respectively tested by split Hopkinson pressure bar and pulse echo modulus determination equipment at room temperature. The surface character, microstructure and Ti/N ratio were analyzed by SEM, XRD and XFD before and after sintering. The results showed that the elastic modulus and shear modulus constants of the TiN cermet were in good agreement with the values reported in literatures, whereas Poisson's ratio was lower than the values reported in literatures. The microstructure and mechanical properties were also discussed.

Translated title of the contribution	The relationship between dynamic mechanical properties and structure of TiN cermet
Original language	Chinese (Traditional)
Pages (from-to)	7099-7105
Number of pages	7
Journal	Gongneng Cailiao/Journal of Functional Materials
Volume	49
Issue number	7
DOIs	https://doi.org/10.3969/j.issn.1001-9731.2018.07.016
State	Published - 30 Jul 2018
Externally published	Yes

Access to Document

10.3969/j.issn.1001-9731.2018.07.016

Cite this

@article{c460b0cbda2342689293efd66e8307f1,

title = "氮化钛陶瓷力学性能与结构关系",

abstract = "The quasi-static and dynamic stress-strain curves of the TiN cermet were respectively tested by split Hopkinson pressure bar and pulse echo modulus determination equipment at room temperature. The surface character, microstructure and Ti/N ratio were analyzed by SEM, XRD and XFD before and after sintering. The results showed that the elastic modulus and shear modulus constants of the TiN cermet were in good agreement with the values reported in literatures, whereas Poisson's ratio was lower than the values reported in literatures. The microstructure and mechanical properties were also discussed.",

keywords = "Dynamic mechanical properties, Elastic modulus, Split Hopkinson pressure bar, TiN cermet, XRD",

author = "Haitao Wang and Zhiyuan Zhang and Yuanpeng Zhang and Yun Bai and Dejian Liang and Runqiang Chi and Baojun Pang",

year = "2018",

month = jul,

day = "30",

doi = "10.3969/j.issn.1001-9731.2018.07.016",

language = "繁体中文",

volume = "49",

pages = "7099--7105",

journal = "Gongneng Cailiao/Journal of Functional Materials",

issn = "1001-9731",

publisher = "Journal of Functional Materials",

number = "7",

}

TY - JOUR

T1 - 氮化钛陶瓷力学性能与结构关系

AU - Wang, Haitao

AU - Zhang, Zhiyuan

AU - Zhang, Yuanpeng

AU - Bai, Yun

AU - Liang, Dejian

AU - Chi, Runqiang

AU - Pang, Baojun

PY - 2018/7/30

Y1 - 2018/7/30

N2 - The quasi-static and dynamic stress-strain curves of the TiN cermet were respectively tested by split Hopkinson pressure bar and pulse echo modulus determination equipment at room temperature. The surface character, microstructure and Ti/N ratio were analyzed by SEM, XRD and XFD before and after sintering. The results showed that the elastic modulus and shear modulus constants of the TiN cermet were in good agreement with the values reported in literatures, whereas Poisson's ratio was lower than the values reported in literatures. The microstructure and mechanical properties were also discussed.

AB - The quasi-static and dynamic stress-strain curves of the TiN cermet were respectively tested by split Hopkinson pressure bar and pulse echo modulus determination equipment at room temperature. The surface character, microstructure and Ti/N ratio were analyzed by SEM, XRD and XFD before and after sintering. The results showed that the elastic modulus and shear modulus constants of the TiN cermet were in good agreement with the values reported in literatures, whereas Poisson's ratio was lower than the values reported in literatures. The microstructure and mechanical properties were also discussed.

KW - Dynamic mechanical properties

KW - Elastic modulus

KW - Split Hopkinson pressure bar

KW - TiN cermet

KW - XRD

UR - https://www.scopus.com/pages/publications/85059812967

U2 - 10.3969/j.issn.1001-9731.2018.07.016

DO - 10.3969/j.issn.1001-9731.2018.07.016

M3 - 文章

AN - SCOPUS:85059812967

SN - 1001-9731

VL - 49

SP - 7099

EP - 7105

JO - Gongneng Cailiao/Journal of Functional Materials

JF - Gongneng Cailiao/Journal of Functional Materials

IS - 7

ER -

氮化钛陶瓷力学性能与结构关系

Abstract

Access to Document

Other files and links

Fingerprint

Cite this